What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,201
Reaction score
51,450
Location
Central Jersey
My gfx got this for me today. I need to make the hole above the glove box for the light still.
IMAG2914.jpg
I also put the Falkens on the rear of the Hoe.
 

YukonXL04

The Riverboat
Joined
Sep 3, 2013
Posts
2,489
Reaction score
178
Location
Arlington, TX
Changed the oil, and my water pump was leaking coolant. I changed the pump, hoses, belts and all that about 15k miles ago. But when I changed it, the pump wasn't bad, just the gaskets. So I assumed same thing this time.
Pulled the pump, cleaned it all, new gaskets and tried rtv on the gaskets this time. Still freaking leaking! And it's not the pump.... not sure but coming from the passenger side Where the pump bolts up
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,201
Reaction score
51,450
Location
Central Jersey
Changed the oil, and my water pump was leaking coolant. I changed the pump, hoses, belts and all that about 15k miles ago. But when I changed it, the pump wasn't bad, just the gaskets. So I assumed same thing this time.
Pulled the pump, cleaned it all, new gaskets and tried rtv on the gaskets this time. Still freaking leaking! And it's not the pump.... not sure but coming from the passenger side Where the pump bolts up
Thermostat housing maybe?
 

S33k3r

Elite Member
Supporting Member
Joined
Aug 14, 2017
Posts
2,861
Reaction score
4,117
Location
Dallas, Texas
I replaced the incandescent reverse bulbs with LEDs on my Suburban. Somehow it's still not bright enough to backup without rolling the windows down, after dark... (Did the same to my wife's Tahoe a week or so ago).
 

Cattivo

Full Access Member
Joined
Dec 21, 2016
Posts
1,251
Reaction score
2,208
Location
The Concrete Jungle
Installed two 52mm gauges in the clock bezel after cutting out some 1/4'' ABS plastic. I used Q-bond to glue it all together... I'm probably going to redo it since I rushed it and the gauges aren't at the same height

Also need to find my 4 gang clip panel to mount all the rocker switches below the 52mm gauges

GMS1.jpg GMS3.jpg GMS5.jpg GMS4.jpg GMS8.jpg
 

Forum statistics

Threads
137,787
Posts
1,992,273
Members
102,780
Latest member
ASG-MikeS
Back
Top