What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tahoewhat]

Ehh nothing much...

 

[Jewel or Jalopy]

Big week, but nothing fun. Oil change, air filter, flushed the brake fluid, new parking brake shoes and changed the rear diff fluid. Bring on the summer road trips!

 

[OHSIXX]

Ehh nothing much...

I dont see anything different...LOL

Awesome

 

[Tahoewhat]

I dont see anything different...LOL

Awesome

ha ha.. nothing at all. ha ha..

 

[SLCHOE]

ha ha.. nothing at all. ha ha..

What grille insert is that? Or is that the stock HD insert?

 

[donovandavis]

Painted hitch receiver black since it was looking bad with all the rust


Sent from my iPhone using Tapatalk

 

[Tahoewhat]

What grille insert is that? Or is that the stock HD insert?

No insert, stock HD grille

 

[SLCHOE]

No insert, stock HD grille

Nice. That whole front looks awesome. Nicely done.

 

[Rokmonanoff]

Yesterday. .. took mine to the shop for maintenance while wife out of town. Brake discs and rotors all around, new MAF, and new o2 sensor on the the left bank

 

[Coatwolf]

2 day project - took diff cover down to bare metal and shot it - looks way better.

This pic was about half way through the process - didn't take a finished pic

 

[01ssreda4]

Need a dadgum oil change. I got the stuff I been putting it off.

 

[Tahoebigdog03]

Changed oil with 10w-30 castrol edge titanium gold and cleaned K&N filter.

 

[YukonXL04]

Ehh nothing much...

So sick. Props man. It looks awesome! Even wife said it looks badass haha

 

[Tahoewhat]

So sick. Props man. It looks awesome! Even wife said it looks badass haha

Thanks and if the wife approves, we are golden then. ha ha...

the pic editing kind of adds to the elements.

 

[missta]

Installed back up camera to in the rain...easy mod...works great


02 Hoe 4wd canadian built flex fuel ls non bose

 

[Atreuce]

painted my speaker grills black.. made a ton of difference.

also fixed some rattles in my rear doors while riding.

and always lookin for wheels since im still on ugly stock 16s

 

[middelgriff1]

Replaced my upper control arms, lower balljoints, pitman and idler arms, sway bar bushings and links, innner and outer tie rod ends. I have my new wheel setup coming in this week and only want to have one alignment done.

 

[clandr1]

Replaced my upper control arms, lower balljoints, pitman and idler arms, sway bar bushings and links, innner and outer tie rod ends. I have my new wheel setup coming in this week and only want to have one alignment done.

What year is your truck, and how many miles do you have on it? I did my steering components a few months back because my tie rods were starting to get some slop, but I didn't do my balljoints/UCA, etc.

 

[middelgriff1]

What year is your truck, and how many miles do you have on it? I did my steering components a few months back because my tie rods were starting to get some slop, but I didn't do my balljoints/UCA, etc.

I have a 2002 coming up on 200k. Its better if you buy the upper control arms with the balljoints already installed from rock auto and lowers with them installed if your wallet can take it. I just ended up pressing the lowers myself so I didn't have to pay 5hrs mech time per side. Not a bad job at all. I took my time and cleaned and regreased everything and it was about 4hrs total.

 

[Rivieraracing]

Oil change!!!