What did you do to your NBS GMT800 Tahoe/Yukon Today?

[tlat075]

put it in the mail from Florida to Alaska.

 

[diffrnt]

Changed the oil and filter the other day. Had my tires rebalanced, rides so much smoother now. Oh yeah, the place that I bought them from, had put 70lbs of air in them... Damn!

 

[yukondoit]

put it in the mail from Florida to Alaska.

Say what? You moving up there? Didn't want to make the drive huh, don't blame you, its about 3,600+ miles 1 way from where I'm at.

 

[BlizzardX23]

drove it to school? lol
I'm loving the fact I actually have shocks now

chris how did you install your OD pulley?
I had Rob at DC Power send me a smaller pulley because I wanted better at idle performance from my alt but I don't have an impact to get the nut off..

Alternator is reverse thread, I just used a big ass breaker bar and held the pulley with the belt loose.

I dont think it was reverse.. ...but either way...all I did was get a socket, and put a screwdriver into the alternator to prevent the fan from spinning...it didnt do any damage at all...it came off easy...easier then a lug nut....so no need for impact gun...

 

[thehoe92]

well then come over and help me with mine

I wrestled that shit for a while with a breaker bar but apparently I'm stronger than the tension on the belt

..yeah right, I even tried putting something in to lodge the belt so it wouldn't move and nothing

 

[clean454]

well then come over and help me with mine

I wrestled that shit for a while with a breaker bar but apparently I'm stronger than the tension on the belt

..yeah right, I even tried putting something in to lodge the belt so it wouldn't move and nothing

put a wrench on the nutt
then wedge it on something then start the truck
it will back the nut off itself
and tada done
(exact opposite for install of new one)

good luck bro!

 

[BlizzardX23]

put a wrench on the nutt
then wedge it on something then start the truck
it will back the nut off itself
and tada done
(exact opposite for install of new one)

good luck bro!

what are you telling him??? LOL...ur an ass...dont tell him shit like that...or you and I will be at his house replacing A LOT more then just a pulley!!!


Kasey...I'm at school...but when I get out at 5pm, I'll head over to your house and pull it off in about 27 seconds...just wait for me to get there....dont **** with it...you'll break something!

 

[highrollin113]

attempted front brakes and stripped bolt holding calliper on, oh and broke a hammer, oh and im not very impressed i am painting the callipers red to give it a more sporty look

 

[Travieso]

take plenty of pics this is probably my next mod since it wont Damage the wallet

 

[tmtb2013]

Ordered MB Quart DSH 216 components for the front and MB Quart DKH 116 coaxials for the rear. Now just can't wait for them to get here so I can get them in.

Played with the settings on my AVIC-Z1 to see how far I could push the stock speakers since I am getting new ones.

Scouring this forum for ideas of what I want to do and how to do it.

 

[BOSS]

Today I used my tahoe to light up my 65 Olds while I changed the oil, dropped some ATF into the cylinders to sit for a few days and hopefully lube the rings up a big and break any rust that might be ther, and then changed the plugs out.

Even though under the hood looks like a sand dune with tumble weeds from sitting for 28 years, gunna try and start my baby soon!


B

 

[highrollin113]

take plenty of pics this is probably my next mod since it wont Damage the wallet

under general discussion i have a thread for painted calipers theres pics posted

 

[thehoe92]

lmfao!!! you act like you do work on my truck

this was like back in december when I got my new alt, I haven't tried anything since then since I don't have a system and don't need the extra at idle amperage but since you brought it up I figured I would get my done since you think its so easy


I put my new decal on I ******* LOVE IT!!!!!

"Haters Love Me <3" in flat black looks **** up against my blacked out back window

chris you are going to need to change your pants when we put one on you window

 

[fatnlowtahoe504]

lmfao!!! you act like you do work on my truck

this was like back in december when I got my new alt, I haven't tried anything since then since I don't have a system and don't need the extra at idle amperage but since you brought it up I figured I would get my done since you think its so easy


I put my new decal on I ******* LOVE IT!!!!!

"Haters Love Me <3" in flat black looks **** up against my blacked out back window

chris you are going to need to change your pants when we put one on you window

put up a picture!!

 

[thehoe92]

I tried getting one on my phone but it was too dark in my garage

found a picture my mom took when I first got my hoe.. taking off the running boards
I still had my side moldings, emblems, and fender flares on!!

 

[Merc762]

Sway Bars

Just installed a set of Eibach Front and Rear Sway Bars. Pictures of the sways and xenons to come.

 

[ypsetihw]

attempted front brakes and stripped bolt holding calliper on, oh and broke a hammer, oh and im not very impressed i am painting the callipers red to give it a more sporty look

hope you stipped the carrier bolt and not the caliper slider . . . that would be bad cause if the slider was stuck then you have more problems. shoulda looked at my DIY first I warn against those caliper carrier bolts . . . I broke a socket on one, that was before I got me a torch. a little heat and those things just twist right out.

 

[clean454]

I put my new decal on I ******* LOVE IT!!!!!

"Haters Love Me <3" in flat black looks **** up against my blacked out back window

chris you are going to need to change your pants when we put one on you window

dude i cant wait ill prolly be home monday
so u made 2 stickers? nice

and get a pic up of it!

 

[thehoe92]

put a nice coat of NXT wax and Mothers Top Coat with my buffer on tonight

I always say it but.. this is the cleanest my hoe has ever been

 

[highrollin113]

hope you stipped the carrier bolt and not the caliper slider . . . that would be bad cause if the slider was stuck then you have more problems. shoulda looked at my DIY first I warn against those caliper carrier bolts . . . I broke a socket on one, that was before I got me a torch. a little heat and those things just twist right out.

well i learned two things i figured out on my own DIY after only 2 minutes lol, (do it yourself, right???) and i am going to check out now and i think its the carrier bolt its the 18mm not the star head and its not a write off so if i get heat on it i think i could salvage only thing is brakes looked good when i took the wheels off.