What did you do to your NBS GMT800 Tahoe/Yukon Today?

[blueinkd]

Isn’t that just so ****** up though.. how do people go through life that way? It ******* baffles my mind....

 

[Tonyrodz]

Best mod so far!! Didn't come with remotes when I got it.

https://www.amazon.com/dp/B0777QP3LK?ref=ppx_pop_dt_b_product_details&th=1

View attachment 264508

How'd you know which frequency you needed?

 

[Doubeleive]

How'd you know which frequency you needed?

The freq are in your rpo codes in the glove box
XL7 is 315mhz (most common on the older trucks)
XL8 is 433mhz

 

[Tonyrodz]

The freq are in your rpo codes in the glove box
XL7 is 315mhz (most common on the older trucks)
XL8 is 433mhz

Ahh, nice. Didn't know that.

 

[Tonyrodz]

Ahh, nice. Didn't know that.

I show X88.View attachment 264523

 

[Doubeleive]

I show X88.View attachment 264523

View attachment 264522

you have AU0 which is remote keyless entry, so there must be a another code that defines the freq im digging...

 

[Doubeleive]

I show X88.View attachment 264523

View attachment 264522

you don't have your build sheet? it might have expanded numbers in there, if nothing else it may be on the module which is probably inside the drivers rear panel I think that is where the remote entry module is but I could be wrong.

 

[Doubeleive]

this pdf file has a boatload of RPO definitions
http://hhrregistry.macswebs.com/tech/rpo_codes.pdf

 

[Tonyrodz]

you don't have your build sheet? it might have expanded numbers in there, if nothing else it may be on the module which is probably inside the drivers rear panel I think that is where the remote entry module is but I could be wrong.

 

[Tonyrodz]

this pdf file has a boatload of RPO definitions
http://hhrregistry.macswebs.com/tech/rpo_codes.pdf

That's a pretty good list.

 

[Doubeleive]

That's a pretty good list.

post up the last 8 of your vin and @915_Tahoe should be able to tell what frequency the remote fob is. I bet money it's 315mhz though.
once you find that out you still have to be sure to order the right fob part number
if you look on the back of your existing fob there are some numbers imprinted on it.

 

[blueinkd]

Lawd! I just ordered those since they showed to work with my 05

 

[Tonyrodz]

post up the last 8 of your vin and @915_Tahoe should be able to tell what frequency the remote fob is. I bet money it's 315mhz though.
once you find that out you still have to be sure to order the right fob part number
if you look on the back of your existing fob there are some numbers imprinted on it.

I did order a fob back in 2012-13. They had asked what the FCC number on the back of the original fob was. Thankfully I had 1 original fob. I was just curious how someone would know what fob to get if they didn't have an original to look at.

 

[Doubeleive]

I did order a fob back in 2012-13. They had asked what the FCC number on the back of the original fob was. Thankfully I had 1 original fob. I was just curious how someone would know what fob to get if they didn't have an original to look at.

dealer would be able to tell you by the vin number

 

[915_Tahoe]

I show X88.View attachment 264523

View attachment 264522

X88 means chevy

 

[Sam Harris]

Isn’t that just so ****** up though.. how do people go through life that way? It ******* baffles my mind....

100%!! I see it all around me every day!

 

[Danny3737]

Looks like it’s getting a little thin

I know this topic is a little stale, but I ran across this pic today and it reminded me of this. I don't know how someone could not know that something was wrong here.

 

[mattbta]

Ordered an NNBS leather shifter on fleabay. Also 2015 key fobs from Boost.

 

[915_Tahoe]

X88 means chevy

and Z88 is GMC

 

[Jazzman_q]

Not a today post, more like the last few days.

Upper Control Arms (both sides)
Tie rods inner and outers
Shocks
Brakes

Now for an adult beverage!!