What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Fosscore]

Soooo a slight battery issue with the Suburban, but will detail in the NNBS section. Wife had to drive the Tahoe to the store while I dealt with it.

On to the fun stuff. The messy party for my daughter is on. And the homemade foam machine has been tested. This should be a winner.

Ready to foam.

Foaming.

The set up is ready for the girls tomorrow.

 

[HiHoeSilver]

Soooo a slight battery issue with the Suburban, but will detail in the NNBS section. Wife had to drive the Tahoe to the store while I dealt with it.

On to the fun stuff. The messy party for my daughter is on. And the homemade foam machine has been tested. This should be a winner.

Ready to foam.
View attachment 185953


Foaming.
View attachment 185954


The set up is ready for the girls tomorrow.
View attachment 185955

Wtf are you doing?

 

[TheAutumnWind]

Replaced the driver door, hatch & lift gate weatherstripping


Sent from my iPhone using Tapatalk

Was it in bad shape? Cleaning and dressing mine as well as using an adhesive made my hatch weatherstripping like new again.

 

[95escahoe]

Was it in bad shape? Cleaning and dressing mine as well as using an adhesive made my hatch weatherstripping like new again.

Ya it was pretty bad, was really flat it was beyond repair


Sent from my iPhone using Tapatalk

 

[TheAutumnWind]

Ya it was pretty bad, was really flat it was beyond repair


Sent from my iPhone using Tapatalk

Ah yeah it was toast then. Bet its nice having it all sealed up again!

Mine drove me nuts when it would slip out of place and there was a ton of wind noise

 

[TheAutumnWind]

Wtf are you doing?

It's for a party for his daughter.

 

[95escahoe]

Ah yeah it was toast then. Bet its nice having it all sealed up again!

Mine drove me nuts when it would slip out of place and there was a ton of wind noise

Honestly never had that issue it was flat so I replaced it but you can tell when you close it now it's a nice solid seal


Sent from my iPhone using Tapatalk

 

[TheAutumnWind]

Honestly never had that issue it was flat so I replaced it but you can tell when you close it now it's a nice solid seal


Sent from my iPhone using Tapatalk

Yeah my kids are constantly dragging big ol bags full of football gear and softball gear out of there and kept pulling the seal off.

 

[JollyRoger01]

I still got work to do with the hvac panel, but I finally had some time to tinker.

 

[95escahoe]

Scored a set of clean gray Escalade door panels off EBay I'll have the switches, and rear EXT panels for sale here shortly


Sent from my iPhone using Tapatalk

 

[05Single]

Finally after 15 years I found these again. Been looking everywhere. Just didn't know the name. Love these connectors. Was detailing a trade-in at a dealer one day and found a bunch of them. Nobody knew where to find them or who made them. Just yesterday I saw a guy use them on a YouTube install video and he used these and said the name 'posi-tap'. Gonna be ordering a bunch of these.

https://www.posi-products.com/posiplug.html

Obviously not designed for exterior use but great for interior temporary accessories or stereo connections. If you have a short lead and don't want to make it shorter and shorter every time you replace the component with a broken one or an upgrade.

 

[02tahoe2tone]

Got new calipers on rear tires, brake pads, oil change, and a new K&N cone filter.

 

[drowssap]

Finally after 15 years I found these again. Been looking everywhere. Just didn't know the name. Love these connectors. Was detailing a trade-in at a dealer one day and found a bunch of them. Nobody knew where to find them or who made them. Just yesterday I saw a guy use them on a YouTube install video and he used these and said the name 'posi-tap'. Gonna be ordering a bunch of these.View attachment 186008

https://www.posi-products.com/posiplug.html

Obviously not designed for exterior use but great for interior temporary accessories or stereo connections. If you have a short lead and don't want to make it shorter and shorter every time you replace the component with a broken one or an upgrade.

I totally agree with the awesomeness of the posi-taps! While nothing beats a solid splice and solder....these are the next best thing

 

[Devilmk4]

4hi mod. Hid on the low and led on hi. Will be switching to all led

 

[Tonyrodz]

4hi mod. Hid on the low and led on hi. Will be switching to all led

View attachment 186036

Looks like a Jersey street.

 

[Devilmk4]

Your right on the money..

 

[bottomline2000]

Replaced the seal in my hydro boost for a 2nd time. An install error last time case a small tear in the lip of the seal. Hopefully it holds this time..

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[Sevenevez]

I still got work to do with the hvac panel, but I finally had some time to tinker.

View attachment 185987 View attachment 185988 View attachment 185989

looks great

 

[PG01]

4hi mod. Hid on the low and led on hi. Will be switching to all led

View attachment 186036

Looks like a Jersey street.

You 2 NJ Devils......lol

 

[BADRIDES]

4hi mod. Hid on the low and led on hi. Will be switching to all led

View attachment 186036

Which leds are you using?