What did you do to your NBS GMT800 Tahoe/Yukon Today?

[BoxChevy216]

I would have to disagree with all 3 of you! Check it out:
View attachment 182189

Is that one of the street scene rear bumper covers?

 

[Rocket Man]

Is that one of the street scene rear bumper covers?

Mine's just stock Denali with a shaved wiper and Escalade rear appliques and roof rack.

 

[95escahoe]

Here's the new bumper painted & installed came out pretty good

Picked up this mint Pewter Gray passenger seat bezel as a spare since you can no longer get the passenger side one from GM

Installed these Phillips 194 bulbs in the license plate lights, I go with a name brand for these due to them being something you don't want going out had the non 360 degree ones before these are 10x brighter

Sent from my iPhone using Tapatalk

 

[Rocket Man]

Here's the new bumper painted & installed came out pretty good

Picked up this mint Pewter Gray passenger seat bezel as a spare since you can no longer get the passenger side one from GM

Installed these Phillips 194 bulbs in the license plate lights, I go with a name brand for these due to them being something you don't want going out had the non 360 degree ones before these are 10x brighter

Sent from my iPhone using Tapatalk

Don't have the license plate frame yet? Looking good buddy.

 

[95escahoe]

Don't have the license plate frame yet? Looking good buddy.

Thanks, going to order the black screws & frame this weekend


Sent from my iPhone using Tapatalk

 

[TheAutumnWind]

Deep cleaned the leather seats. Tried scrubbing bubbles. So gross. The mf towel was bright yellow before I started.

 

[Rocket Man]

Deep cleaned the leather seats. Tried scrubbing bubbles. So gross. The mf towel was bright yellow before I started.

View attachment 182247 View attachment 182248 View attachment 182249 View attachment 182250

Stuff works, huh? I used it and it was amazing.

 

[TheAutumnWind]

Stuff works, huh? I used it and it was amazing.

Yeah. I hadnt realized how discolored it all was until i scrubbed the center console and resprayed the drivers seat. The shale tan color looked so much lighter.

 

[TheAutumnWind]

Here's the new bumper painted & installed came out pretty good

Picked up this mint Pewter Gray passenger seat bezel as a spare since you can no longer get the passenger side one from GM

Installed these Phillips 194 bulbs in the license plate lights, I go with a name brand for these due to them being something you don't want going out had the non 360 degree ones before these are 10x brighter

Sent from my iPhone using Tapatalk

So clean! Looks amazing

Plastics need some attn though.

I have some inexpensive leds (same as my interior t10s) in my plate lights. Still looks good.

 

[TheAutumnWind]

Stuff works, huh? I used it and it was amazing.

The crazy thing is that i have lexol leather cleaner and an apc that i have used not too long ago.

 

[95escahoe]

So clean! Looks amazing

Plastics need some attn though.

I have some inexpensive leds (same as my interior t10s) in my plate lights. Still looks good.

Thanks, I was gonna replace the step pads but just the top ones were close to $200 a side going to try some back to black on them, see how that holds up and go from there


Sent from my iPhone using Tapatalk

 

[Tonyrodz]

Yeah. I hadnt realized how discolored it all was until i scrubbed the center console and resprayed the drivers seat. The shale tan color looked so much lighter.

What's the process? Spray it on, scrub it then wipe it off? Good for plastic too? Won't give the plastics that white haze discoloration?

 

[Rocket Man]

Thanks, I was gonna replace the step pads but just the top ones were close to $200 a side going to try some back to black on them, see how that holds up and go from there


Sent from my iPhone using Tapatalk

I removed mine and used Krylon Fusion in satin black and 2 years later they still look new.

 

[02_Tahoe]

I personally think CM only looks good on lowered trucks for the most part, but there are some exceptions to the rule.

Hoping I am this exception

 

[TheAutumnWind]

What's the process? Spray it on, scrub it then wipe it off? Good for plastic too? Won't give the plastics that white haze discoloration?

Spray it on and buff it off. I just use my regular all purpose cleaner interior dilution to clean plastics.

 

[TheAutumnWind]

Deep cleaned the leather seats. Tried scrubbing bubbles. So gross. The mf towel was bright yellow before I started.

View attachment 182247 View attachment 182248 View attachment 182249 View attachment 182250 View attachment 182252

Layed down a couple of coats of classic coat shale. SEM 17203 Shale Classic Coat - 16 oz. https://www.amazon.com/dp/B000H6O2VA/ref=cm_sw_r_cp_apa_xWIQzb6MSWJPX

After a prep spray

SEM 38353 Plastic Prep - 12 oz. https://www.amazon.com/dp/B00B3HXWFO/ref=cm_sw_r_cp_apa_JXIQzbKKH2R6R

First pic is pre classic coat



The scratches and wear creases are much less noticeable.

Not as good as new but a huge improvement for $35 or so for 4 bucket seats. Good enough for my kid hauler.

Wish i got 2x cans of classic coat though for more layers.

 

[TheAutumnWind]

Drivers seat bottom leather replacement!

Old:
View attachment 182206

New:
View attachment 182207

I got the new cover from TheSeatShop.com. Top quality and a great factory color match. Used a tip they suggested and cleaned the seat back with Scrubbing Bubbles, then leather conditioner. Man it clean up the dirty seat back really well. Left side and top have already been cleaned.
View attachment 182209

All done:

View attachment 182210

Did you get new foam too? It looks great. Mine could probably use new foam. I tried the scrubbing bubbles thanks to your post mentioning that the seat shop recommended it. Id heard that before but that put me over the top. Worked a treat thanks!

 

[mwilson62000]

Did you get new foam too? It looks great. Mine could probably use new foam. I tried the scrubbing bubbles thanks to your post mentioning that the seat shop recommended it. Id heard that before but that put me over the top. Worked a treat thanks!

Yes, i got new foam. Mine wasn't terrible, but I figured replace it all now while I had it all apart. I was amazed at how well the Scrubbing Bubbles worked also. I'd never heard of that until the seat shop mentioned it. I'm hoping to do the rest of my seats today. Just make sure you put conditioner on the seat afterwards.

 

[05Single]

2000th page

 

[Rocket Man]

2000th page

And I got the 20,000th reply!