What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

Just placed my order for the swap. Merry Christmas to me!

 

[OhFourChevy]

Dropping my truck of at the shop. To finish the lift I currently have Keys, 2" rear spacers, TJ rear Links, cognito front links, shock extenders, 295/70/17MT
Front 38.5
Rear 40.25

Should be getting 3" more in the front and 2" more in the rear, so it should look pretty darn level, if not, I may end up ordering 1-1.5" spacers and replacing my 2"

Moog UCAs, lower ball joints, in/out tie rods, SS braided hoses, 5100s all around, spindles, 2" lift rear coils, Spohn adj pan hard bar, rear wheel spacer (2"), new front speed sensors, alignment, brake flush.

Sorry about the dark picture, I just took it, I figured I might as well get one last pic while the truck is 3" shorter than it will be Saturday afternoon when I pick it up

 

[Fosscore]

Just placed my order for the swap. Merry Christmas to me! View attachment 70315

Whoa..going to be mean sounding. Need clip when you are done with install.

 

[Fosscore]

Dropping my truck of at the shop. To finish the lift I currently have Keys, 2" rear spacers, TJ rear Links, cognito front links, shock extenders, 295/70/17MT
Front 38.5
Rear 40.25

Should be getting 3" more in the front and 2" more in the rear, so it should look pretty darn level, if not, I may end up ordering 1-1.5" spacers and replacing my 2"

Moog UCAs, lower ball joints, in/out tie rods, SS braided hoses, 5100s all around, spindles, 2" lift rear coils, Spohn adj pan hard bar, rear wheel spacer (2"), new front speed sensors, alignment, brake flush.

Sorry about the dark picture, I just took it, I figured I might as well get one last pic while the truck is 3" shorter than it will be Saturday afternoon when I pick it up
View attachment 70339

Man that is helluva parts list. Should be dialed in when she comes back. Look forward to pics and your report.

 

[Tonyrodz]

Whoa..going to be mean sounding. Need clip when you are done with install.

Absolutely! Gonna take awhile to get everything together. Still gathering parts.

 

[Smoke Em All]

Well today I actually used my heater for the first time this season.

Can anyone tell me why I seem to be able to hear my heater through the onstar speaker? It only does it with the heat not the ac. It's like a buzz that come from the speaker above the driver seat.


Sent from my iPhone using Tapatalk

 

[OhFourChevy]

Yeah I think she'll be like riding on pillows come Saturday night, first thing I'm going to do is give her a bath and take some pictures

Man that is helluva parts list. Should be dialed in when she comes back. Look forward to pics and your report.

 

[seven9st surfer]

Replaced my cheap ebay light strip underbody LEDs with 4 rock light pods. Miss the overall glow vs the distinct light sources, but the pods are much higher quality than the strips. Still pretty happy with them. And no, I don't run them like this all the time. They're wired into the courtesy lighting circuit, so they come on with the puddles.

 

[jarydM]

Replaced my cheap ebay light strip underbody LEDs with 4 rock light pods. Miss the overall glow vs the distinct light sources, but the pods are much higher quality than the strips. Still pretty happy with them. And no, I don't run them like this all the time. They're wired into the courtesy lighting circuit, so they come on with the puddles.

View attachment 70343

That looks great! How hard was it to tap into the courtesy circuit?

 

[seven9st surfer]

Honestly, kind of a pain. I originally did it about a year ago, and I remember having to take the door paneling apart and finally tapping in behind the side view mirror. Then I routed it through as much of the factory harnesses as I could, through the door, door jamb, under the footwell, and out through the parking brake gasket. Like I said, kind of a pain.

 

[05Single]

Honestly, kind of a pain. I originally did it about a year ago, and I remember having to take the door paneling apart and finally tapping in behind the side view mirror. Then I routed it through as much of the factory harnesses as I could, through the door, door jamb, under the footwell, and out through the parking brake gasket. Like I said, kind of a pain.

Yea I wired mine up to a switch (so they can be on when parked, or driving lol). but I was lazy and drilled a hole in my body on the footwell lol.
I was gonna initially tap into my footwell lights cause I figure getting to the mirrors would be a pain. plus the interior lights come on with the puddle lights anyway.

 

[OhFourChevy]

Got her back from the shop, drives like a new truck with all the suspension parts I've thrown on.

 

[Tonyrodz]

1/2 paid. Getting closer!!

 

[Countryboy07]

1/2 paid. Getting closer!! View attachment 70432

Sweet!

 

[Tonyrodz]

I can't freakin wait!!

 

[aquacure]

Well today I actually used my heater for the first time this season.

Can anyone tell me why I seem to be able to hear my heater through the onstar speaker? It only does it with the heat not the ac. It's like a buzz that come from the speaker above the driver seat.


Sent from my iPhone using Tapatalk

Thats not a speaker. You need this part...its a small fan thats making the noise. Has something to do with the temp control.

https://www.amazon.com/gp/product/B008B5TVC4/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

 

[Smoke Em All]

Thats not a speaker. You need this part...its a small fan thats making the noise. Has something to do with the temp control.

https://www.amazon.com/gp/product/B008B5TVC4/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Thanks now I feel dumb lol.


Sent from my iPhone using Tapatalk

 

[Smoke Em All]

View attachment 70427 View attachment 70428 View attachment 70429View attachment 70430 Got her back from the shop, drives like a new truck with all the suspension parts I've thrown on.

So you happen to have any close up pics of your bumper possibly before it was installed?


Sent from my iPhone using Tapatalk

 

[Rocket Man]

I can't freakin wait!!

Yeah I can't wait either! Hurry up dammit!

 

[a4edwin]

Finally got the Nelson harness installed and got to turn on the pins with the hp tuners!!! Works like a charm.