kaoticx
TYF Newbie
Anyone running a tc in their GMT900? If so what kind of other mods did you do, and what kind of power increase did they yield?
Turbo?
- Thread starter kaoticx
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OOoo Shiet! 
Deephaven
Full Access Member
- Joined
- Mar 25, 2013
- Posts
- 263
- Reaction score
- 4
Better question is how much power do you want and what is your budget. Plenty of Turbo trucks with over 1k hp.
OP
OP
kaoticx
TYF Newbie
Just curious if anyone else has one on their truck that I could do some comparisons with. I have the sts rear mount. The turbo size is a 64 with the 35mm waste gate. AEM boost controller, AEM fuel/air ratio Guage, high stall torque converter, replaced the transmission cooler, changed all the seals when I added the torque converter, of course intercooler, and all other accessories.
Haven't opened up the engine yet to do additional mods for more power. As it stands now I'm at 433 hp and 546 lbs torque at 7lbs of boost. About to dial up the boost to 10lbs now that I have the torque converter put in so I can get the power over 500hp. Just trying to see if what kind of power I could get with other mods before I start really getting into it....
Thanks guys..
---------- Post added at 02:56 PM ---------- Previous post was at 02:54 PM ----------
And I know that by doing a cam package and running E85 I could get to 600hp. I would really rather not have to depend on E85 if I don't have to though....
Haven't opened up the engine yet to do additional mods for more power. As it stands now I'm at 433 hp and 546 lbs torque at 7lbs of boost. About to dial up the boost to 10lbs now that I have the torque converter put in so I can get the power over 500hp. Just trying to see if what kind of power I could get with other mods before I start really getting into it....
Thanks guys..
---------- Post added at 02:56 PM ---------- Previous post was at 02:54 PM ----------
And I know that by doing a cam package and running E85 I could get to 600hp. I would really rather not have to depend on E85 if I don't have to though....
Still playing with that grenade of a 4L6X trans?
OP
OP
kaoticx
TYF Newbie
Stock transmission. Lol.
Decided against dialing up the turbo for now. Gonna swap the transmission first. Only thing is finding one at a reasonable price.
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
Decided against dialing up the turbo for now. Gonna swap the transmission first. Only thing is finding one at a reasonable price.
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
I would like to get it up to around 650-700 range. Not really trying to get to extreme. Would still like to drive it and not haul it. [emoji16]
MayhemJoe
Member
Anyone know if the On3 kit will fit NNBS?
Sent from my D6616 using Tapatalk
Sent from my D6616 using Tapatalk
Check performancetrucks.net for the on3 thread for all info you need.
Similar threads
