thehoe92 Lowered 3/5

[thehoe92]

it rubs before it bottoms out..
I attempted to roll the fenders where it rubs but I don't have the right technique I guess

 

[Narco]

your shit is gonna be loooooooow

 

[thehoe92]

the hoe under going surgery haha!

yee buddy!

trimming parts of the fender liner that rub

the drivers side bump stop bracket is a little longer and this picture also tells me I need shorter end links haha!

 

[thehoe92]

and the way it sits now

what its like from my point of view

you can see where it started to rub before I rolled the fender

and my favorite picture of the group

 

[89 chevy]

How many of the body mount rubber isolaters did you remove?

 

[denalianyone]

Did you remove the top rubber boot entirely? Or just trim it?

 

[89 chevy]

Did you take just the rear two mounts off right in front of the rear tire, or did u take all the rubber mounts off? If you just took the rear 2 mounts out, didn't that mess with the door gap and the way the door shuts?

 

[clean454]

How many of the body mount rubber isolaters did you remove?

the rear 6
2 before the axle
2 over the axle
and 2 behind the axle

---------- Post added at 01:15 PM ---------- Previous post was at 01:14 PM ----------

Did you remove the top rubber boot entirely? Or just trim it?

entirely

 

[89 chevy]

Thats what I needed to know! Thanks!

---------- Post added at 04:14 PM ---------- Previous post was at 03:42 PM ----------

It only took you guys about an hour didn't it?

 

[thehoe92]

you are correct the door gap changed which is why I want to get the front body mounts out today
its not bad, the door still shuts but that can't be good for long

and you can't really judge how long it takes us to do something because we end up just laughing to damn much to get anything done or we do something twice because the first time wasn't right

but if you know what you are looking for, trimming, taking out etc it should only take about an hour

 

[89 chevy]

I wonder if you could get away with not taking the ones out by the front clip, and remove all the others?

---------- Post added at 07:01 PM ---------- Previous post was at 06:57 PM ----------

Because you will have to take quite a bit of stuff out on the front. Or thats the way it looks?

 

[Young28]

damn that shit looks good.

 

[Max]

Looks much better, makes me wanna find some poly cab mounts for mine. You can build some brackets for the bumpers to get them back to stock spec.

 

[89 chevy]

I wonder if you could get away with not taking the ones out by the front clip, and remove all the others?

---------- Post added at 07:01 PM ---------- Previous post was at 06:57 PM ----------

Because you will have to take quite a bit of stuff out on the front. Or thats the way it looks?

?? Would this work, or would the doors probably be a little off still??

 

[clean454]

u can leave the front ones in it should be ok
they are not that hard to get out
u just need another set of hands that will make it go faster

 

[thehoe92]

yeah the front is way trickier than the rear thats for sure
but got it done today thanks to clean

I loved when we would raise the jack on one side of the hoe and the opposite corner would tuck tire it was so sexy!!

and I don't know how well you can see the gap between the bumper and the hatch haha!

I'll get some more pictures tomorrow since I just got inside from detailing it at night lol

but thanks everybody
I love the stance on it now

---------- Post added at 12:38 AM ---------- Previous post was Yesterday at 11:32 PM ----------

before the front body drop as I was detailing it..

back tire tuckin

 

[89 chevy]

Does the front rub when it turns since its tucking the front tires?

 

[denalianyone]

why remove the rear wiper and not shave the entire liftgate?

 

[Travieso]

wow looking good bro, how did you get the back to drop so much ?

 

[89 chevy]

He took all the rubber body mount isolators out.