Still all over the road after rebuild and alignment

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,713
soo i scrolled back up your running a 275 55 20 right? for easier numbers for tire dumbies like me thats about a 32x10.5 tire. im running a 265 70 17 on my 97 which is a 31.5x 10.5 and when my alignment is in i can practically let go of the wheel completely. only difference here is you have less sidewall than me which should make your tires stiffer than mine. im running the stock 97 steering setup also and i can turn the wheel with a single finger. only difference is yours is lifted if i recall with the hydroboost steering.
 
OP
OP
Squirrelsmith

Squirrelsmith

Full Access Member
Joined
Jan 21, 2018
Posts
914
Reaction score
788
soo i scrolled back up your running a 275 55 20 right? for easier numbers for tire dumbies like me thats about a 32x10.5 tire. im running a 265 70 17 on my 97 which is a 31.5x 10.5 and when my alignment is in i can practically let go of the wheel completely. only difference here is you have less sidewall than me which should make your tires stiffer than mine. im running the stock 97 steering setup also and i can turn the wheel with a single finger. only difference is yours is lifted if i recall with the hydroboost steering.
I am not lifted
 

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,713
I am not lifted
my bad thought you were lifted should be even more inline with mine being able to be properly aligned. thought this thread was dead did you make any progress on getting it to run straighter?
 
OP
OP
Squirrelsmith

Squirrelsmith

Full Access Member
Joined
Jan 21, 2018
Posts
914
Reaction score
788
my bad thought you were lifted should be even more inline with mine being able to be properly aligned. thought this thread was dead did you make any progress on getting it to run straighter?
Just starting to work on it again
 

Forum statistics

Threads
129,130
Posts
1,810,901
Members
92,218
Latest member
SteveandKish
Top