rough country leveling kit

[kbi83]

i installed my leveling kit last week and i gotta say from what ive seen online i think i should be sitting a little taller, as i researched most kits came with a 1.5 or 2" rear spacer this kit came with a .05" so i guess now i need to order taller ones and crank up the fronts? i mean i think its lifted about an inch from what it was before..

why would all leveling kits be different sizes?

 

[AquinoSteven]

the front is the same but the rear is is different. I only have 2"s in the rear because my rear coils are worn.

 

[kbi83]

the true test will be when my wheels and tires get here, and see if they clear, i was hoping for a taller look... but i might order some 1.5 and install them and crank the keys a bit more

 

[polobuds]

pics?

 

[kbi83]

wheels and tires are on the way...

 

[polobuds]

looks good. you get the rc leveling kit that came with the rancho shocks?

what tire/wheel combo you getting?

 

[kbi83]

yes i did.. lovin the ride

---------- Post added at 09:13 PM ---------- Previous post was at 09:12 PM ----------

i still want a tad higher, like i said earlier i think i will order either 1 or 1.5 spacers and crank the keys

 

[BlueTahoe2001]

Looks Good man! What size tires did you end up going with? How bout' new wheels?

Anyway, The RC Kit only comes with the .75 Poly Spacer. You will have to purchase 1"-2" spacers if you want more lift.

 

[kbi83]

rough country leveling kit w/ 20in rockstars and 33" nittos

still not happy with the height so ive already ordered 1.5 spacers... pics to follow after install

 

[pats hoe]

Looks great any rubbing?Do you have the front cranked all the way up?I just got my keys and spacers im putting on saturday.Trying to decide on tires for my 20's.Looks good with 33's.

 

[kbi83]

ya i was hit awhile back and my bumper wasnt pulled all the way back out so i got alittle rubbing... and no im not ever close to cranked to the top its just level with the rear right now.. the RC kit comes with a 3/4 spacer, i went ahead an ordered the 1.5 and i will crank the keys when i get them installed and get a little more height..

 

[pats hoe]

ya i was hit awhile back and my bumper wasnt pulled all the way back out so i got alittle rubbing... and no im not ever close to cranked to the top its just level with the rear right now.. the RC kit comes with a 3/4 spacer, i went ahead an ordered the 1.5 and i will crank the keys when i get them installed and get a little more height..

ok thanks tires and rims look great

 

[polobuds]

kbi83, looks sick! Nice selection with the rockstars and nittos. i'm back and forth between the 33" nittos and the grabber AT2, and thinking of going with XD 796 or some pro comp wheels.

Thanks for posting the pics. It goes a long way to help someone like me imagine what our hoes would look like with certain mods. Can't wait to see the pics with the new spacers. Much appreciated!

---------- Post added at 08:40 PM ---------- Previous post was at 08:24 PM ----------

what is the diameter of the nittos you got? Did you say they were 32.83" or something like that? Any rubbing in the front? Wondering if I could get away with 33.42" nittos with the same RC leveling kit.

 

[AquinoSteven]

kbi83, looks sick! Nice selection with the rockstars and nittos. i'm back and forth between the 33" nittos and the grabber AT2, and thinking of going with XD 796 or some pro comp wheels.

Thanks for posting the pics. It goes a long way to help someone like me imagine what our hoes would look like with certain mods. Can't wait to see the pics with the new spacers. Much appreciated!

---------- Post added at 08:40 PM ---------- Previous post was at 08:24 PM ----------

what is the diameter of the nittos you got? Did you say they were 32.83" or something like that? Any rubbing in the front? Wondering if I could get away with 33.42" nittos with the same RC leveling kit.

All depends on your rim. Stock rim yeah, anthing else that sticks out farther will rub more. Im running a 32.8 on my locks and i had to trim a bit in the fenderwhel

 

[polobuds]

got it. thanks steve.

once i decide on the wheels, then i should know what tires I'll go with.

 

[kbi83]

ur welcome guys thx for the compliments...

 

[MUDHOE]

kbi83 how wide of wheels did you get i want the same wheels on 305/55 bfg mts and i was planning on getting the 10'' wide wheel

 

[McAllister513]

Looks good man but black out those tails and it will be perfect mane! I just finished my hoe!

Its good to see another Victory Red Hoe on here!

 

[kbi83]

kbi83 how wide of wheels did you get i want the same wheels on 305/55 bfg mts and i was planning on getting the 10'' wide wheel

8.5 wide

---------- Post added at 08:39 AM ---------- Previous post was at 08:39 AM ----------

Looks good man but black out those tails and it will be perfect mane! I just finished my hoe!

Its good to see another Victory Red Hoe on here!

for sure man... thx man

 

[gmcjohn]

I got the same kit. It looks like it's higher in the back, and a bit in the front. The guy who put them on for me said that he didn't crank the keys at all. I'm thinking about bringing the front completely level with the back (as there is slight rake currently), and putting 16" or 17" mickey thompson classic II's and some 32's or 33's. I want to rid myself of the wheel gap, but I don't want a giant wheel tire combo on there, and I also personally prefer smaller wheels w/ beefier tires.