Puddle Lamps

[stl2e]

How do I replace the bulb in my puddle lamps I cant seem to get the cover off?

 

[ecordell]

There is a little place where you could insert the tip of a flatblade screwdriver and basically you'll pry the screwdriver towards the lap lens (gently) and then start pulling down while you are prying and it should come off, kinda like changing a dome light. The bulb should be right there.

 

[01burban]

i tryed changing mine and they both dont work is there a fuse some where or and i just not so lucky?

 

[puckhead]

The new bulbs are sometimes a little loose. Try squeezing the conectors together a little and see if that helps. Couldnt find a fuse that was specifically for the puddle lamps though. Maybe soemone else would know.

You kinda have to jimmy the housing out a little to get to the bulb. at least on mine I had to. bulb is encased in a small housing you have to open up with 2 small Phillips screws.

 

[01burban]

ya tryed to sqweeze all the connecters and still no luck.

 

[JKmotorsports]

Look in the fuseblock under the hood. The exterior courtesy lamp circuit is protected by a 15 amp fuse labeled SEO 1.