do you any of you guys have a oem transfer case skid plate? I am looking for a part number for it if you do, thanks
Ppv/ssv 4wd transfer case skid plate?
- Thread starter Doubeleive
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
swathdiver
Full Access Member
20922755 - Wait, now it's saying this is not the one for my truck, bought it off ebay earlier this year and was too cheap to buy self-tapping bolts for it... That can't be right, I'm not usually wrong before I make a purchase! LOL
OP
OP
have you tried it to see if it fits correct or not? I was looking at that one, looks like the same one for the colorado's which mounts to the crossmember and then to the transfer case
915_Tahoe
Your GM Parts Specialist
GM#20922755
LIST$ 40.09
LIST$ 40.09
OP
OP
places are saying that it is for 2014+, will it still fit 07-13?
915_Tahoe
Your GM Parts Specialist
07-14
ALSO FITS TO 15-20 YEAR MODELS
OP
OP
ok, thanks
swathdiver
Full Access Member
Yes I did and it matched right up.
Looks lije this
If i can find part # ill get it but i think 01-up are basically same even for pickups
If i can find part # ill get it but i think 01-up are basically same even for pickups
OP
OP
for future reference it looks like this also is p/n: 23282726 (skid plate & bolts kit)
seems like a better deal price wise as the bolts are around $10-11 (each) separate if you just buy the skid plate alone.
feedback from other people that have purchased this kit say it does not give a whole lot of confidence, but is better than nothing at all.
with that said I still can't believe I ran over a stop sign and didn't get a scratch under the truck. lol
seems like a better deal price wise as the bolts are around $10-11 (each) separate if you just buy the skid plate alone.
feedback from other people that have purchased this kit say it does not give a whole lot of confidence, but is better than nothing at all.
with that said I still can't believe I ran over a stop sign and didn't get a scratch under the truck. lol
Ps the alum splash shield we have is the same thickness as the alum oil pan skid
OP
OP
ya I replaced the very front plastic one with a aluminum one and I have the aluminum one for the front diff/oil pan, figured it wouldn't hurt to have the transfer case one as well, I ordered it $54 with 3 bolts shipped. I might have to buy one more bolt or hit the junkyard for one I think the nbs bolts are the same size.
No, its plastic, both me and doubie ordered an aluminum one from some ebay dude
OP
OP
usually they are plastic but there are aluminum oem ones apparently, I had mine by the rod louver guy in san diego
supposed to be a 3 piece kit # 23176882 but not many around
found this black aluminum front one https://www.cjponyparts.com/general...lverado-gmc-sierra-1500-2015-2018/p/23176881/
OP
OP
kbuskill
***CAUTION*** I do my own stunts!
I remember looking at the ones the guy builds for our trucks... the problem is I didn't like the price.
The problem with the factory aluminum one is... I don't like the price any better than the other one.
I need a super special custom one anyway to clear my dual remote mount oil filters... guess I will have to make one some day.
Ilikemtb999
Full Access Member
So mine isn’t factory?
