not balanced??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

whitexfe

TYF Newbie
Joined
Mar 30, 2011
Posts
23
Reaction score
1
Location
houston, tx
I just put on some brand new 24" KMC slides mounted with some Nexen roadian tires and I only have about 3500 miles on them and they seem out of balance. It has a good vibration around 60-70 mph.... Any ideas?
 

yates ™

Resident Apple hater
Joined
Jul 9, 2010
Posts
24,413
Reaction score
6,448
Location
Iowa
I would take them to another shop and have rebalanced.
 

THE YETI

Director of Operations
Supporting Member
Joined
Apr 29, 2009
Posts
27,178
Reaction score
15,481
Location
South FL
high speed balance them, too. not just standard balancing.
 

InTruckDesign

Full Access Member
Joined
Jun 5, 2009
Posts
832
Reaction score
29
Location
SW CT,
Remove the wheels and check that the little metal clips that hold on the rotors during production are removed. They will prevent aftermarket wheels from sitting flat to the rotor, factory wheels are machined to fit with them on.
 

THE YETI

Director of Operations
Supporting Member
Joined
Apr 29, 2009
Posts
27,178
Reaction score
15,481
Location
South FL
Remove the wheels and check that the little metal clips that hold on the rotors during production are removed. They will prevent aftermarket wheels from sitting flat to the rotor, factory wheels are machined to fit with them on.

I was going to suggest this too but figured the problem would have been obvious at all speeds from day one. But definitely check into that!
 

Forum statistics

Threads
138,148
Posts
2,000,533
Members
103,074
Latest member
TallHoe 96 OBS
Back
Top