New LED Tails, cure for fast flash?

[Matt06Yukon]

Hey guys, just installed new led tail lights on my dads 03 Z71.
The turn signals now flash quicker i know because it doesnt sense the correct amount of resistance
Without the bulb. Whats the cure?

 

[chauncey0337]

Load resistors. For some strange reason the cruise control is also affected by this issue. You'll need one in parallel with each led signal. Be sure to mount them in a spot suitable for high temps as I've heard they get pretty hot-
http://www.ebay.com/itm/Load-Resist...Parts_Accessories&hash=item416eb75772&vxp=mtr
Or get led tails with the resistors built-in.

 

[ezdaar]

Or get the Relay from a HD truck.
They are designed to work with LEDs.

Resistors suck.

 

[Matt06Yukon]

Relay from a HD truck, please elaborate? Where do I install it? Ya itd be nice if these had it built in

 

[ezdaar]

http://www.superbrightleds.com/cat/flashers-load-resistors/
http://www.vleds.com/flashers.html

Call, then to make sure you get correct relay


For you 10 pin Denali guys. Dont ***** about the price, You drive a Denali.
http://www.discountfleetsupply.com/grc44140.html

 

[davidsSLT]

Are these the ones from Ebay that look pretty good you installed? I was thinking about getting them

 

[Mr.Jack]

I installed resistors at the front turn signals. On both front sides.
That took care of the problem when I installed LED turn signals both front and rear.

 

[Matt06Yukon]

Ya. They are pretty nice, stupid lights should have these resistors built in.

 

[BPB]

On my jeep I just used an electronic flasher relay that I bought at napa for $15

 

[Matt06Yukon]

That's what i did on my jeep too.

 

[Danzigman]

Hey guys, just installed new led tail lights on my dads 03 Z71.
The turn signals now flash quicker i know because it doesnt sense the correct amount of resistance
Without the bulb. Whats the cure?

Get an LED flasher, it is better than hacking the harness up for resistors.

 

[BPB]

Plus if you don't use resistors you will have a little bit more electricity to use on music!!!