Looking for some expert advice

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big_THoe

TYF Newbie
Joined
Jan 1, 2025
Posts
12
Reaction score
4
Just installed a new K&N high flow cold air intake and the engine growls at random speeds, not just open throttle. Pulling from a light and easy on the pedal it growls, shifting from 2nd to 3rd it growls, open throttle this thing sounds like a T-Rex. While I love the sound at OT, the other instances are a bit too much!! So my question, since I’ve installed it and can’t take it back, would a smaller Filter fix my issue. I don’t have a ton of options as the Flange diameter is 6 inches but I do see smaller units available on the K&N site.
 

jerry455

Full Access Member
Joined
May 19, 2024
Posts
260
Reaction score
195
I used the mini kit, just the intake tube from the throttle body to the stock air filter housing and a K&N filter, stock Suburban sized. It sounds great. It has a nice growl when accelerating. You might see if another brand or type of filter would fit. I know some vehicles use a paper, stock, type of material.
 

RST Dana

Elite Member
EMT/First Responder Firefighter Supporting Member
Joined
Jan 15, 2018
Posts
1,974
Reaction score
1,856
Location
OH
Changing filter types probably won’t make the difference you are seeking. I covered one of the openings once years ago, leaving only the opening toward the wheel well. It did reduce some of the growl, but not all.
 
OP
OP
Big_THoe

Big_THoe

TYF Newbie
Joined
Jan 1, 2025
Posts
12
Reaction score
4
Thanks for the replies guys. I think restricting the flow is the way to go, that’s why I thought of a smaller filter. I might try one of K&N own Dryflow filters, the one I am thinking is a couple of inches shorter than the one I currently have.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,678
Reaction score
52,941
Location
Oregon
I mean, you added a high flow CAI and now you’re going to restrict it? That’s going backwards from stock. Just reinstall the stock CAI , add an aftermarket high-flow filter and sell the K&N CAI.
 

houstontaylor

Full Access Member
Joined
Dec 4, 2017
Posts
133
Reaction score
156
Because those cold air intakes don't have a resonator cavity they allow too much noise from the engine to build up.
 

jerry455

Full Access Member
Joined
May 19, 2024
Posts
260
Reaction score
195
I would'nt say too much noise, I love the sound of the K&N intake kit I have. I think I have the jr. kit, intake tube and replacment air filter, using the stock air cleaner and intake set up.
 
OP
OP
Big_THoe

Big_THoe

TYF Newbie
Joined
Jan 1, 2025
Posts
12
Reaction score
4
I’ve used CAI on all of my previous trucks and have one in my Audi and it makes the engine sound throatier but this one roars at OT and growls when you give the car a little gas. It’s not a constant growl either, more of a bark, then it’s suddenly quiet? Like I said if like the OT growl, but the random barks are just a bit much!! I tried a smaller filter and it didn’t do anything. I am going to try one more thing before going back to the stock box.
 

Forum statistics

Threads
137,671
Posts
1,989,105
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top