Hey Guys

[DVPPV]

So heres my newly acquired 17 PPV. Had a previous PPV. Also known a 12 ppv and an 08 CVPI.

Current upgrades.
1. Full carpet over rubber flooring
2. Center console ( need help with wiring to make it functional. IDK if I can get it all to work, like rear ac controls, 110v )
3. Wrapped chrome window trim.

To do list ASAP
1. Wrap Chrome grill and chrome spotlight mounts.
2. Auto start, Viper.
3. Upgrade to I06 system. I have the screen, and module now need to source the wires to make the parts operational.
4. LOWERING. NEED ADVICE ASAP on this. Very confused

Any help would be appreciated gents.
TM

 

[Doubeleive]

welcome

 

[Tonyrodz]

Welcome. I like it . Know the history of it? Was it a supervisor's vehicle? Municipal? Feds?

 

[Big Mama]

Welcome from Virginia try Tony @NORCAL SS for suspension

 

[wjburken]

Welcome from Iowa.

 

[OR VietVet]

Welcome to the forum from Oregon. More pics please.


We recommend that you put all your rig(s) info in your signature so we all don’t have to guess at year, make, model, engine size, trans, rear axle locker…….etc. Makes it way easier on all members that attempt to help, to have that info right up front. It is also recommended that you take a pic of your RPO codes, on the inside cover of the glove box, and post that image in your signature. All this info will greatly help those that will try to help with a problem.


If there is any other info, like upgrades, mods or recent mechanical/maintenance work done, that would be helpful in any post as well. Too many times a question is asked by the poster and after about 10 responses we find out that the poster has done recent work to attempt to fix the problem or work that was done that SEEMS not related to the problem.

 

[Joseph Garcia]

Welcome to the Forum from NH.

It looks like you got yourself a very good new-to-you truck.

Folks here are more than happy to help you spend your money on mods.

I trust that you will become a participating member on this Forum's discussions. Two-way communication increases our knowledge base.

 

[1BADI5]

Welcome from Virginia try Tony @NORCAL SS for suspension

I concur, that's where I got my kit

 

[Chickensandwich]

I went through the io6 upgrade. Assuming your parts are programmed to your VIN, I’d contact MVI for the cabling. If your getting NAV, don’t bother with a splitter, just buy the $30 nav antenna. If you need any assistance, I can help...it’s quite the project.

 

[Big Mama]

Most of the rigs you see on here are 4x4. If you go to the menu and click forums and go to your model you’ll see a street suspension section.