Ghost Shadow Door Kit installed with pic

[Ponchonutty]

Well, I was bored and grabbed 2 sets of these from one of my suppliers. Install wasn't too bad. I ended up grabbing power from the dome light + wire at the BCM. I used a relay to isolate it though because the lights wouldn't come on right away when you opened a door.

Popped off the door panel

Marking off panel

Kit used

Comes complete with drill

Not sure if any of you have done anything like this but I love my home made tool. It's a 3' long zip tie used on ducts. Cut off the "zip" and drill 2-4 small holes in the end and now you have the ultimate fishing tool. No worries of poking holes into things you don't want to.

Zip tie fished through door boot.

Projector installed in door

Finished project.

 

[Ben]

ohhhh noooo

 

[OklaHemi]

Those wouldn't make sense on my Tahoe.... I kid, I kid. Those looke phenomenal

 

[Ponchonutty]

LOL. They do have Tahoe and the Bowtie too ;/

 

[jasonsbiz74]

Those are sweet

 

[Khao5]

those look like they should have the bat signal instead of the GMC logo in them

 

[bigrhino]

Nice!

 

[blkonblk]

Very nice, I like

 

[Gzes]

 

[livingez_123]

Really?

so classless.

 

[Regency]

Nice work man, looks good.

 

[Ponchonutty]

those look like they should have the bat signal instead of the GMC logo in them

Yeah, they make those too lol!

 

[riggz]

Those crying that they are ricey or classless, just know that the new Range Rover puddle lamps do the same thing.... Don't know too many ricer range rovers out there.

 

[Gzes]

 

[Regency]

I wouldn't consider that range ricey.

 

[Goodinblack]

those look like they should have the bat signal instead of the GMC logo in them

This

 

[OHSIXX]

Meh. My puddle lamps are more than sufficient.

 

[stephygee]

Very nice

 

[Ponchonutty]

Haha, I don't really care. Everyone that has seen it so far loves it. Got 3 cars to do now out of it so it can't be that bad lol! There are some issues that I have found in this platform though. The amperage of these lights must be enough the the BCM doesn't like it. I didn't want to use the actual door triggers in fear of causing other issues. I can't us a regular relay off of the domelight source because it will buzz slightly when being triggered or shutting off. Using a timer relay you have to compensate the time they are on. I'd rather have them mirror the domelights exactly. I am going to swap all of the interior lights with LEDs and see if the BCM will behave OK with all of them online. If not, I may have to use a micro relay inside each door for triggering.

 

[bacin87]

Has anyone found the lights for a. Chevrolet Bow Tie and the website to purchase?

Sent from my SPH-L710 using Tapatalk 4