I have the dreaded 3 light flash then nothing.
Pump clutch does not engage.
I tried jumping the low pressure switch on the dryer. Nothing.
Tried unhooking the battery for a while. Nothing.
Swapped relay. Nothing. All fuses good.
It has no codes for HVAC.
When commanded on with scanner, light flashes 3 times then, nothing.
I would think jumping the low pressure switch would allow it to come on if pressure was the problem?
What ever happened is recent. Scanner says it has been malfunctioning for the last 12 starts.
Any ideas where to look?


Pump clutch does not engage.
I tried jumping the low pressure switch on the dryer. Nothing.
Tried unhooking the battery for a while. Nothing.
Swapped relay. Nothing. All fuses good.
It has no codes for HVAC.
When commanded on with scanner, light flashes 3 times then, nothing.
I would think jumping the low pressure switch would allow it to come on if pressure was the problem?
What ever happened is recent. Scanner says it has been malfunctioning for the last 12 starts.
Any ideas where to look?

