Mallory0707
TYF Newbie
- Joined
- Jul 1, 2024
- Posts
- 1
- Reaction score
- 0
How would I go about removing these scratches by the cup holders?
Console Scratches
- Thread starter Mallory0707
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
How would I go about removing these scratches by the cup holders?
ReaperHWK
Full Access Member
- Joined
- Oct 14, 2020
- Posts
- 1,013
- Reaction score
- 1,243
Id say to try a plastic polish, but the issue you have is that is not clear plastic and it will get all hazy. The only real fix is a new trim piece I'd agree.
Or maybe someone makes a "cover" online that you can put over it. Even a vinyl?
Or maybe someone makes a "cover" online that you can put over it. Even a vinyl?
- Joined
- Aug 2, 2018
- Posts
- 10,557
- Reaction score
- 15,327
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
UsualSuspect
Full Access Member
Take a look at GM part# 84921581. Most of the console pieces just pop in and or out, look at the exploded parts diagram to get an idea. I just pieced together a floor console for an older truck, it was easier to assemble than I thought it would be.
