Clicking sound from blower?

[warndogg]

my point was if you look at your existing part connections (on the back) it will either have 1 connector or it will have 2 connectors, then order what you need accordingly. I think I did the same thing on 2003 Silverado years ago I couldn't figure out which one it used so I pulled it out and looked at it and then ordered the same one.

Ok well the first one I had linked is the one that matches I guess I will just orfer another one today. thx

 

[swathdiver]

I agree thats why I bought an AC Delco. I hooked it straight to 12v and the new fan works perfectly. I don't think its out of the realm of possibilities that the new resistor that I put in is faulty and yes I do know how resistor works but I'm just saying I never had this pulsing ticking motor vibrating until I put in the new style resistor. Thats why I am asking if anyone has a part # because there are at least 2 styles listed as working for this vehicle.

Justin, we're in the middle of doing three oil changes but I can offer this advice: head on over to GMPartsDirect and put in your VIN to see what parts were made for your truck. I'll come back and try to help later on today.

 

[warndogg]

Justin, we're in the middle of doing three oil changes but I can offer this advice: head on over to GMPartsDirect and put in your VIN to see what parts were made for your truck. I'll come back and try to help later on today.[/QU
I will

 

[warndogg]

Thanks swath thats the resorce I needed. I came up with GM part # 22807123. I think the one I ordered off eBay is faulty. There is an updated design as the original 3 wire style is known to have problems . Thats why I am looking at one with a different connector. I found this one on Amazon that should work.
https://www.amazon.com/dp/B078J3B4S8

 

[Doubeleive]

Thanks swath thats the resorce I needed. I came up with GM part # 22807123. I think the one I ordered off eBay is faulty. There is an updated design as the original 3 wire style is known to have problems . Thats why I am looking at one with a different connector. I found this one on Amazon that should work.
https://www.amazon.com/dp/B078J3B4S8

I think what happens is the connector sometimes melts along with the resistor so the updated one comes with a fresh connector

 

[swathdiver]

Ok, you got it figured out and Wes' statement confirms my recollections.