Paint em black , pop em out . If there leather . Wash them good , then take a rag and acetone and wipe em down ( removing protective coat ) sand the whole seat with 800 grit , hit it with acetone again. Wipe down with a clean rag and alcohol. Spray 2 coats of adhesion promoter it’s at the auto parts store . You can use duplicolor black automotive spray can it’s $14 a can or $54 for a 6 pack on Amazon. Or angelus leather paint and an airbrush . The cloth part of the seat eats the paint up . Multiple thin coats . The angelus paint needs an additive called “2-soft “ for fabrics . Multiple thin coats , if it’s coming out the can thick you don’t have to make complete coverage each pass . It’s a coating itl fill in after a couple sprays . Heat gun dry it. .it will keep u from spraying a cold joint on wet paint to soon . And flake or crack off . You can spray or wipe on a protective layer clear coat . For Lester / flex .
