AndrewPPV83
TYF Newbie
- Joined
- Jun 12, 2018
- Posts
- 2
- Reaction score
- 2
What CAI do you recommend for a 2014 Tahoe PPV?
Black Bear Performance 2016 Intake Test
- Thread starter JennaBear
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
When we did the testing the aFe performed the best, we tested part number 54-74104. The aFe that should apply to your vehicle is part number 54-74103. Here is a link to the test results on our website. http://blackbearperformance.com/IntakeTestResults_2016.asp
Awfiretto
Member
- Joined
- Jul 20, 2018
- Posts
- 48
- Reaction score
- 46
Blackbear Perf, yal are awesome! I have searched for weeks looking for real info on CAI.
Any chance we could see the results from your past tests as well? The 2012 one would help a lot of 07-14 owners. From what I have been able to deduct is it was completed on the 5.3 most all of have.
Actually how I ended up on this thread was a post about your previous 12 test. All the links are dead from that test.
Sent from my iPad using Tapatalk
Any chance we could see the results from your past tests as well? The 2012 one would help a lot of 07-14 owners. From what I have been able to deduct is it was completed on the 5.3 most all of have.
Actually how I ended up on this thread was a post about your previous 12 test. All the links are dead from that test.
Sent from my iPad using Tapatalk
Thanks Alex! We would not be able to post the results from that testing, but if you want to email us, let us know what you are looking for, we MIGHT be able to dig something up.
I can let you know what performed the best at that time, the Airaid Jr 201-796, here is a link to it on our shopping cart, plus there is a dyno graph posted on that page as well.
http://store.blackbearperformance.com/Airaid-2007-2013-48-62L-TruckSUV--201-796_p_403.html
I can let you know what performed the best at that time, the Airaid Jr 201-796, here is a link to it on our shopping cart, plus there is a dyno graph posted on that page as well.
http://store.blackbearperformance.com/Airaid-2007-2013-48-62L-TruckSUV--201-796_p_403.html
Awfiretto
Member
- Joined
- Jul 20, 2018
- Posts
- 48
- Reaction score
- 46
This is perfect! Thank you. Traveling right now, but when I get back I’ll be emailing for a tune. Your approach to this testing gives me the confidence to reach out to yal for a tune. Been considering a tune for the past few months... but haven’t really been able to find a company to trust with it all ... don’t want to blow up my daily.... I am a “don’t push it, but tweak it safely” kinda gear head... after all the positive posts and analytical “real” approach yal have I am sure BBP will help me do it right for my 07 with 108k on it. And you will be my only choice when I decide to tune. Thanks again!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Awfiretto
Member
- Joined
- Jul 20, 2018
- Posts
- 48
- Reaction score
- 46
Email sent !
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
We did the testing with a 08 Silverado 5.3L Flex Fuel.
G00se
Full Access Member
Might be dumb question, but on the intake where the filter is exposed, is there any reason to be concerned about it getting wet?
No. Not really. Even if it's an open air intake the hood does a good job in blocking the air. If it is a closed air system it draws air from the inner fender.
Sent from my SM-G955U using Tapatalk
Dear Jenna Bear,
It's awesome in word. many thanks for your attached link and it's have good result.
appreciated for such kind of update at any kind of thread
You are welcome. Let us know if you have any questions.Dear Jenna Bear,
It's awesome in word. many thanks for your attached link and it's have good result.
appreciated for such kind of update at any kind of thread
Dear Concern,
no more question right now. as i am new here hope at any trouble shooting will get your kind preference.
Happy to help.Dear Concern,
no more question right now. as i am new here hope at any trouble shooting will get your kind preference.
For the 07-13 models, when we tested intakes in 2012, the Airaid Jr did the best, which just replacing the modular intake tube, and the filter.
Warriorpluto
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 351
- Reaction score
- 159
No vararam twin intake test?
BBP test was for 2016 model (K2xx - generation)
VR only lists up to 2011 for GM trucks/suvs
doesnt look like it would have smooth airflow.
buy one & send it to BBP & have them test it
Similar threads
