A/C issues in July after recently rebuilding.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

13JRomee

TYF Newbie
Joined
Apr 21, 2025
Posts
4
Reaction score
1
Hi Happy HOT July!
2002 Tahoe LS 5.3L
A/C Orifice issues Getting the correct size and type.
I rebuilt the A/C did some modifications blanked off the rear >>> it didn't work upon buying. Kept the big size condenser, it's new as are the lines, accumulator, evaporator, compressor.
I installed a larger diameter GM orifice tube that is .072. Sitting in town going under 30 or so it's freezing cold. Get out on the road and it gets kinda muggy inside and the A/C feels like it is failing. Get back into a town or slow down and it's freezing again. Out on the road it gets muggy
A friend of mine that is an A/C guy threw his gauges on it. My friend noted that the low side is tripping/dumping. The compressor is cycling often. The high side pressure and temp is a bit above normal. My friend said that's not a big concern. And the system seems to be fully charged.
The orifice tube GM Genuine pats #3096068 is what I installed.
At 1000 or so RPMs the compressor is cycling quite abit.
I'm hunting a smaller diameter tube.
 

nonickatall

Full Access Member
Joined
Nov 19, 2022
Posts
836
Reaction score
1,556
Location
Germany
You don't need a smaller diameter line; you can simply add a little more refrigerant.

If you have a friend who works on air conditioning, have them add 50g more refrigerant to the system and check the pressure gauges. That will tell you if the amount is correct. If it's not enough, just add more in 50g increments until it's right.

My motto is: never open a sealed system...
 
OP
OP
1

13JRomee

TYF Newbie
Joined
Apr 21, 2025
Posts
4
Reaction score
1
I've lost track of the amount of 134a I've put it the system. the normal amount according to GM specs for the 1.8 pounds for a single system. The dual is 3 pounds >>> with A/C in the rear.
Since I'm running a mix of components single/dual mix of stock components it's changed the system capacity to unknown.
I'm in agreement with don't open the system>>>> unfortunately I'm going to have to once I get the correct smaller diameter tube.
I've all the equipment to do the work just hate messing with it.
Now my friend with the gauges is almost insisting I get the A/c in the rear going. He keeps pulling up info on the rear expansion valve.
 

Forum statistics

Threads
137,874
Posts
1,994,244
Members
102,851
Latest member
Jcampbell73
Back
Top