jessielifted97
TYF Newbie
- Joined
- Jun 19, 2013
- Posts
- 3
- Reaction score
- 0
I started my truck up one day and it ran fine until i got a couple blocks away from my house. I did lay into it a little bit just enough to hear my exhaust and all a sudden it backfired really loud and died. I coasted to a buddys house and it hasnt started since. It was acting like it wasnt getting any fuel but when i put a gauge on it right behind the throttle body it read 65 psi at crank. I went on to look at the distributor cap and the screw on the back side was broken and i could move it up and down. I replaced the cap and epoxy'd the piece that was broken back on and tried to start but its backfiring through the intake. I took the #1 plug out and held my finger over the hole while someone turned it over and it has good compression. maybe i jumped the timing by laying into it? I just dont know what to do.