40's

[Modded]

thanks 4 your input i didnt ask what you thought of what i was doing.

---------- Post added at 01:49 PM ---------- Previous post was at 01:46 PM ----------



at my job we have done 38's on alot of 2wd trucks with no problems i didnt think 40's would be much different

I would do 37s if I were you, the only issue is your truck looks to be too high with all that lift it may not look right.
Do you have a Bulletproof lift, or CST, FTS?

---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------

http://www.gmfullsize.com/forum/showthread.php?t=177017

 

[InTruckDesign]

Only thing I would do is get some 4wd hubs, removed the axle from it leaving you with the outer part that mounts to the spindle and the stub shaft that goes thru the spindle, this way the hub cannot fall out when it fails which is the biggest downfall/fear of lifted 2wd 1/2ton trucks.

 

[THE-HOE]

I had 40's on a 6-3 set up, with 3 inch cut out bushwhacker flares on my 1996 half ton. Only rubbed when i jumped it. If you do not want to cut fenders you will need a 12 i would say.

 

[MUDDER TRUCKER]

i have the 6-3 combo and had 38 swampers on. the more u go on ifs the worse it is, do the sas swap, its way worth it!

ps i get 4.5 mpg

 

[Conor]

2WD lifted trucks =

 

[HELLFIRE]

2wd lifted trucks =

sorry buddy i didnt ask what you thought.

If you dont have anything that will help me out just keep it to your self.

 

[MUDDER TRUCKER]

do u want to keep the ifs or do a solid axle swap? i have seen the welds break on ifs kits over 10in.

---------- Post added at 09:29 AM ---------- Previous post was at 09:23 AM ----------

check out offroad unlimited and offroad direct. both have good kits!

---------- Post added at 09:36 AM ---------- Previous post was at 09:29 AM ----------

 

[fco_gonzo]

[/QUOTE] ...at my job we have done 38's on alot of 2wd trucks with no problems i didnt think 40's would be much different [/QUOTE]

What did you use to clear 38's?

 

[SkipM]

Nevermind - keeping to myself

 

[Git-Sum]

I'm running 40's on a 2002 yukon. I have a 6" susp. 3" body torsion bars cranked. It rubs like hell so I think I'm going to have to step down to a 38