2018 Motor Mount

[WildBill]

I just picked up a 2018 Yukon XL Denali. It looks like i need to replace a driver's side motor mount. Previously, on my last NNBS i upgraded to a solid rubber mount from an H3. Is there a solid rubber alternative in the k2 platform? I'd like to not have to do this again with the stock oil filled mount.

I've seen some fabricated mounts with a poly bushing, but i think that i would feel more vibration than id like

TIA

 

[WildBill]

Are the oe hydraulic mounts failure prone on these models?

Has any one used the aftermarket fabricated poly mount? Opinions?

 

[B-train]

I have not done them on my 2017 yet, but from my experiences in the past, the OEM stuff is really the best. If you liked how it drove before hand, then stick with that. I've gone the cheap route, and there is more vibration than normal because the material is harder.

 

[duke90]

I have these on mine: https://atomicfabandperformance.com/product/14-18-gmt2kxx-lt-poly-motor-mounts/

Definitely feel more vibration than OEM ones. I'm going to remove them when I get a chance and add a piece of poly bushing in between to help mitigate the vibration.