2007 Yukon tranny help

[Yukon2007]

I have a 2007 Yukon drives fine in second and first but third and fourth you will be driving and it’s like it just falls out of gear and goes to neutral. No codes I’m assuming the trans needs replaced?

 

[Fless]

Welcome to TYF from Colorado.

Moved you here from General Discussion to Engine & Drivetrain.

 

[89Suburban]

@NickTransmissions

 

[NickTransmissions]

I have a 2007 Yukon drives fine in second and first but third and fourth you will be driving and it’s like it just falls out of gear and goes to neutral. No codes I’m assuming the trans needs replaced?

4L60E? If so, 3-4 clutch pack is wiped. Time to yank it out and overhaul or replace it.

 

[Yukon2007]

4L60E? If so, 3-4 clutch pack is wiped. Time to yank it out and overhaul or replace it.

Yeah I believe it is, need to find a shop that is willing to do it with upgrades

 

[89Suburban]

Yeah I believe it is, need to find a shop that is willing to do it with upgrades

Where are you located? Have you done any research on local shops and their reviews?

 

[Yukon2007]

Where are you located? Have you done any research on local shops and their reviews?

I’m in New York and I’ve called a few shops and they don’t wanna do upgrades just stock

 

[89Suburban]

I’m in New York and I’ve called a few shops and they don’t wanna do upgrades just stock

NY city or upstate?

@PG01 is upstate I forget the NY city rep here.

 

[89Suburban]

Oh sht I I forgot PG changed his screen name here

 

[NickTransmissions]

I’m in New York

New York City?

 

[Yukon2007]

NY city or upstate?

@PG01 is upstate I forget the NY city rep here.

Upstate I’m about an hour south of Syracuse

 

[89Suburban]

Upstate I’m about an hour south of Syracuse

Ok it is @PG01 that lives up there, his name is Pete. He disappears at times but if he pops in and sees this maybe he can help recommend somebody. His last post was in November.

https://www.tahoeyukonforum.com/threads/the-what-you-up-to-thread.54016/page-6830#post-1832415

 

[NickTransmissions]

Upstate I’m about an hour south of Syracuse

I know Syracuse is a few hours from Long Island but if you can't find anyone in town to do the work, you can call Gary Ferraro at AAA-1 Transmissions - he's in W. Hempstead, I believe...Chris Kirkonis at CK Performance is also on Long Island so either can help you directly or perhaps refer you to somebody in Syracuse.

 

[Yukon2007]

Ok it is @PG01 that lives up there, his name is Pete. He disappears at times but if he pops in and sees this maybe he can help recommend somebody. His last post was in November.

https://www.tahoeyukonforum.com/threads/the-what-you-up-to-thread.54016/page-6830#post-1832415

ok thank you that would be very helpful I want to make it so I don’t have to worry about it again

 

[Yukon2007]

I know Syracuse is a few hours from Long Island but if you can't find anyone in town to do the work, you can call Gary Ferraro at AAA-1 Transmissions - he's in W. Hempstead, I believe...Chris Kirkonis at CK Performance is also on Long Island so either can help you directly or perhaps refer you to somebody in Syracuse.

What upgrades would you recommend asking for ?

 

[NickTransmissions]

What upgrades would you recommend asking for ?

For a daily driver that flexes into a moderate performance or heavy duty role, id do an Alto High Energy clutch module, 3-4 power pack, vette servo, sonnax hp1 performance pac, sonnax smart shell, transgo unbreakable pump ring kit plus all the usual stuff (new bushings, electronics, steels, bonded apply pistons, etc).

 

[Yukon2007]

For a daily driver that flexes into a moderate performance or heavy duty role, id do an Alto High Energy clutch module, 3-4 power pack, vette servo, sonnax hp1 performance pac, sonnax smart shell, transgo unbreakable pump ring kit plus all the usual stuff (new bushings, electronics, steels, bonded apply pistons, etc).

Ok that’s exactly what I want