2007 Tahoe - ABS Issue C0110

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bedhead514

TYF Newbie
Joined
Jun 30, 2011
Posts
24
Reaction score
3
Location
Atlanta
2007 Z71 Tahoe 4x2 136k miles

I've owned this Tahoe since Nov '25 and it's had an sporadic ABS issue since I purchased. The code I get is C0110. I've replaced all 4 wheel speed sensors, bought and swapped in a used ABS module off eBay, cleaned the main ABS ground under the drivers door and checked the fuse/relays under the hood. Nothing has made a difference yet. What's bizarre is the truck works fine with no dash lights for entire trips some days, then other days warning lights go off just after start. About the only thing I can think of is there's a connector in the ABS pump that's loose and the pump needs repair or replacement.

Anyone know if there's anything else I can check or where to get a replacement ABS pump besides eBay?
 

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
3,199
Reaction score
3,951
Fless' link says this..
------------------------
Conditions for Setting the DTC

^ The EBCM motor drive circuit detects a short to battery positive, or open ground circuit, and a continuously on or off motor.
------------------------

Maybe you get a good enough ground for the logic circuit, but not good enough to activate the pump motor.. ?
One last thing I might try before buying an the ABS/EBCM module, check this ground connection..
(disconnect and clean G300 in the link below, looks like it's under driver side door)


Diagram of G300 ground to EBCM..
07ebcm.png
 
Last edited:

Forum statistics

Threads
137,685
Posts
1,989,594
Members
102,686
Latest member
koomie98
Back
Top