2007 suburban want low as poss

[2007URBAN]

New to the site just got an 2007 suburban just debadged it and want it as low as possible without bagging it let me know what good out there on the market

 

[NORCAL SS]

New to the site just got an 2007 suburban just debadged it and want it as low as possible without bagging it let me know what good out there on the market

few questions
1) 2wd or awd?
2) autoride or not?
3) what is your max budget?
4) what tires are on the truck now?


Telll me that I have kits ranging from 2-6 inch front front and rear kit that will give close to 7 inches but if you run tall tires its not going to happen the 3/5+ kit i sell i would go with or the 0-4/5+ kit here
http://www.tbssowners.com/store/index.php?act=viewProd&productId=192

 

[2007URBAN]

few questions
1) 2wd or awd?
2) autoride or not?
3) what is your max budget?
4) what tires are on the truck now?


Telll me that I have kits ranging from 2-6 inch front front and rear kit that will give close to 7 inches but if you run tall tires its not going to happen the 3/5+ kit i sell i would go with or the 0-4/5+ kit here
http://www.tbssowners.com/store/index.php?act=viewProd&productId=192

its a 2wd LTZ

i dont know if it has autoride just picked it up sat night

and the tires are the LTZ chrome 20s upgraded ones from dealer,

looking to run a 26 but if the rubbing on a 2/6 kit ? would like to stay away from the rubberband tires ,i want to get away from cutting and hacking it up , if i have to run a 24 wheel then i would have no choice correct? now does the now does the angle of the driveshaft gets outta wack? and clearance as weel from it have any issues ?

thanks josh

 

[NORCAL SS]

then you have autoride. That being said here is the kit you shoudl get along with 305 35 24 you will be good to go
http://www.tbssowners.com/store/index.php?act=viewProd&productId=87

same kit with same tire size on my truck

 

[2007URBAN]

then you have autoride. That being said here is the kit you shoudl get along with 305 35 24 you will be good to go
http://www.tbssowners.com/store/index.php?act=viewProd&productId=87

same kit with same tire size on my truck

the wiring coming out of the stock shock would be autoride correct? now is there a bad to have that in wanting to lower it? does it really matter for it on the car... will there be driveshaft rubbing or pen-yen angle problems with these lowering kits? sorry for asking alot of questions.

thanks

 

[Regency]

Hit up modded he has 26's and sits really low

 

[blkonblk]

looks really good man, great job