2003 Yukon Level?

[Night Fury]

Without buying anything is it true that i can "crank" my torsion keys or bars in the front to become leveled and not "stink bug" in the back.
If so how would i go about doing this?

 

[01Konvict]

Yes you can crank on your factory keys to level the truck. Just crawl under the truck and locate the 2 large bolts in with the torsion bars connected to them. The bolts are in the middle of the driver floorboard. Tighten them up and the front end raises, simple. I'm not sure what you mean by "stink bug"....

 

[polobuds]

go to ready lift or suspension maxx and they will have directions on how to install aftermarket keys, but you will be able to figure out how to crank your stock ones. Or you could do a search on youtube for torsion key install and there are plenty of videos to show you

 

[Night Fury]

Thank you guys, if i do decide to get the ones at Suspension Maxx. do i need alignment afterwards?

 

[clemet]

Really after any adjustment of the keys you need an alignment. If you don't adjust them much you can pry get away with out one, but it will wear the tires different. My rule of thumb is an inch up or down means alignment.

 

[Night Fury]

Really after any adjustment of the keys you need an alignment. If you don't adjust them much you can pry get away with out one, but it will wear the tires different. My rule of thumb is an inch up or down means alignment.

alright thank you. gonna do it soon hopefully.

 

[polobuds]

Really after any adjustment of the keys you need an alignment. If you don't adjust them much you can pry get away with out one, but it will wear the tires different. My rule of thumb is an inch up or down means alignment.

+1. An alignment is highly recommended if you "crank" anything.

 

[blueflamed03]

yup, any changes, you will need it done.