I put a new alternator in my 2003 GMC Yukon (5.3L Vortex engine). I loosened the air snorkel/tube to the throttle body during that process. Now there is a whistling sound coming from somewhere in the engine. I tightened the hose clamps as tight as possible and sprayed water at connection points...
At my wits end with my wife’s 04 Tahoe
3 months ago it died on her far away from home. Got it towed home. Both INJ fuses were blown. As soon as I put new ones in and hit the key on they would blow. Found the ground on the back of the head passenger side to be barely hanging on. Cut splice and...
Hi guys,
I have two questions about my 2013 Yukon 6.2L. The car is working just fine but there are two things that I am not sure how normal they are.
1. The car feels a bit sluggish at lower speeds of upto about 40 MPH. When I push the accelerator the car doesn't feel like it is picking up...
I was being thrown a throttle body code so I changed it out relearned and even retuned it but it keeps throwing it into low engine power. Need help troubleshooting what it could be. I have a list of mods so if you think you can help me figure it out shoot a text in the thread.
2007 Yukon SLT 5.3. So after removing the MAF and cleaning MAF and throttle body I took her for a drive. Seemed a bit smoother than normal which was good. But about five min in the cluster threw the Service Battery Charging System Soon warning. I looked at the gauge at it was hovering just about...
And do I have to reset the RPM? I don’t wanna have to do that… with like a computer.
I wanna know the whole procedure beginning to end.
For a 2014 Tahoe. Preferably from someone with a Third or 4th gen. Thanks.
I want to clean my own throttle body, I feel like it’s pretty easy to do. But I’ve seen some guy on YouTube with a third GEN Tahoe that had to use a computer to reset the RPMs at idle after cleaning it. Is this so?
And what’s your guys experience cleaning them?
I feel like I’m losing power...
Hi guys,
I have cleaned my throttle body and the MAF sensor couple of weeks ago. After the cleaning my 2013 Yukon is not shifting gears as before. It is like it hesitates the shift itself. I haven't had any codes. Also the car idles normally. Any ideas what it could be?
Thanks
Hey everybody,
my tahoe was acting very strange today...
When I turned it on after sitting for an hour the engine idled very rough between 500-800rpm and needed like 30secs to stay at 650rpms.
After 15mins of driving the check engine light came on and the display said the engine has reduced...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.