Thanks, I looked at that thread and didn't see anything with specific wire colors. https://www.tahoeyukonforum.com/threads/wiring-diagram-for-upfitter.135344/
Anyone have a link to or know what the different wire colors are?
This may be the thread that prompted me to start the following thread, can't remember.
You could put some 8's in there:
https://www.tahoeyukonforum.com/threads/want-more-midbass.131552/
And they don't have to be something expensive...
I hadn’t thought about sealing up that hole but can certainly see how that would benefit; maybe I’ll do that on my next one which I’ll be starting soon. Speaking of 8” mid bass, look what I just won yesterday
I started with the Dynaudio 8" in the doors, 3" dome and 1" Dynaudio tweeter at the top of the dash. But because the 3" did not go down low enough for me, I changed the 3" to a focal 4" mid and 1" tweeters with the Focal 3-way passive crossover. I had to cut out the dash and heat/bent the AC...
I'm going to install carpet in my black on black 2010 PPV and was wondering what color carpet others have gone with? Seller on ebay show available 801 Black, 912 Ebony, and #16 Black, 1001A Black, and 1097A Charcoal.
Thanks...
What you are saying makes sense in theory, but in my experience due to the high pass crossover point of 80hz for the door mids, they are still playing sound all the way down to 20hz due to the roll-off that the crossover provides (usually 12 db/octave). A quality 8" can produce those lower...
I have edited my original post because the way it was worded was a little unclear. I am providing a template for others to use to put 8's in the doors.
I am posting this because I saw in another thread which I can't find now, someone trying different 6" door speakers to get better midbass. If you want to get good midbass from your 07-14, put 8" midbass or woofers in the doors. I did this in my 08 Sierra with the use of a speaker rings/adaptor...
Thanks for the info.
After completing this do you think it would be possible to use my existing motorized seat bases and bolt escalade seats to my bases to avoid all the wiring issues? I realize I wont have heat or memory, but that is fine.
I just read your entire thread, very nice. That helped out a lot but I'm a little unsure if I can pull that off. Any advise for after you have now done it? Any particular seat I should try to get and any I should avoid?
The seats in my 2010 PPV are trashed and I am hoping to replace them with leather. Seems like all the yards in my area and ebay mostly have Escalade leather seats for both front and 2nd row.
I can't seem to find a clear answer to this; do Escalade seats function properly with the factory PPV...
Unfortunately I don't have any more pictures of it. I pulled that photo from this forum, it was posted a few years ago by another member. I reached out to him but haven't heard back. I think that one is perfect.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.