Search results

  1. Evildmanarc

    Trans compatibility...

    Oh no offense taken the im sure the exclamation points were off putting it was more excitement than anything. Feels nice doing it right the first time and having no issues so far. Where did your leaks end up coming from?
  2. Evildmanarc

    Trans compatibility...

    I have been and it's been 1800 miles now no leaks! I think I did a pretty good job on it!
  3. Evildmanarc

    Trans compatibility...

    I would believe that. All the research I've done agrees with you. There was some clutch material in the pan when I swapped fluid and filter but I expected that. It shifts really smooth. Some light slippage once in a while but it does the job until I 4l80 swap it. One day.
  4. Evildmanarc

    07+ Brake upgrade on a 00-06 NBS, is it worth it?

    Did you use a different master cylinder or hydraboost or what? I'm curious
  5. Evildmanarc

    2001 Tahoe LS 4x4 build

    Does anyone have any ideas what cold air kit would be best for that hood design? That's the next part on my list I'm going to get. I was thinking I should utilize the full square port that hood has to offer and seal it up to it. I just can't seem to find one. K and n is the way I'd prefer but I...
  6. Evildmanarc

    Trans compatibility...

    Update*** 3kcd installed no issues new fluid filter gasket etc. New tq converter seal (dad mentioned replacing it so I did). No leaks no hiccups. It feels so good to have gas mileage back. While I was down there I went ahead and replaced rear main seal and cover gasket. Made sense because it was...
  7. Evildmanarc

    Trans compatibility...

    Got the trans, 3KCD code came with TC fluid looked new and smelled really good. Paid 350. Wish me luck boys!
  8. Evildmanarc

    Trans compatibility...

    No pinouts required or harness swaps needed? I don't wanna mess this up cuz I can't handle 2nd gear highway mileage anymore but I don't wanna waste my money haha.
  9. Evildmanarc

    Trans compatibility...

    Just a quick question, will a 2kcd 4l60e and a 1kcd interchange? Need more info before I buy this used one. If there's anything specific to making it work what is it? To note, my 2001 tahoe is 5.3 with 4wd If I remember correctly 1 = 2001 and k = 4wd? Any help would be great!!
  10. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    I have thought about a 6.0 upgrade, but I'm seriously happy with my 5.3 and there's still a ton of aftermarket out there for it. But if I did do the 6.0 swap, I'd put my 5.3 on a stand and build it up for my 71 Pontiac.
  11. Evildmanarc

    2001 Tahoe LS 4x4 build

    https://www.bmcextremecustoms.net/2000-2006-tahoe-type-s-style-functional-ram-air-hood-ct00ahtsfh.html It is like perfect for what I'm looking to do.
  12. Evildmanarc

    2001 Tahoe LS 4x4 build

    **UPDATE** I did some thinking over the last few weeks on how to put my steps on and I came up with a solution; Frame mounting. I was able to fabricate my brackets and flip them around to face the frame and that took all the struggle out of making them work on the body. And they are stronger...
  13. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    Oh wow I really like this site! The FAQ section is absolutely amazing! I'm already window shopping a TBSS intake as we speak.... That looks like a perfect addition to my upgrade list, but do you think with the TBSS intake manifold and...
  14. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    Thank you very much I will watch those right now!
  15. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    I will have to look into that then. I definitely want them to modify my crossmember, as I don't trust myself THAT much with a welder. Thank you for your input!
  16. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    Nope lol but if I ever plan on doing any more performance upgrades going over 700tq/hp I might as well go ahead and swap it out lol
  17. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    Am I on the right track? That's VERY affordable too.
  18. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    I'm honestly thinking of putting a big Ole middle finger to the 4l60e and doing the 4l80e swap and my buddy at work is talking me into it. Junkyard 4l80e with the 1600$ conversion kit from https://transmissioncenter.net/shop/4l60e-to-4l80e-conversion-kit-tahoe-hummer-2-pickup-others/ Would be...
  19. Evildmanarc

    Performance upgrade Ideas for my 2001 5.3 Tahoe

    Do you think that cam will rob the low end ? I love my low end I was hoping to maybe even give it more with a cam. If you have a good reccomendation that would be nice. I was just thinking a nice drop in cam to keep the driveability yet still gain some power
  20. Evildmanarc

    Aluminum radiator question

    It's sitting at about It's sitting pretty at 190 ish it doesn't jump up at all and it's been over 100 here in Indiana. Very efficient cooler. And for the build quality and fitment and durability, so far it's worth every penny
  21. Evildmanarc

    2001 Tahoe LS 4x4 build

    What was in asterisks? Just curious lol I know from what I've read this forum filter is **** haha. ANYWAYS thanks for the welcome and I will probably take your advice and see if there is a nerf style bracket mount that would fit those bars and would also mount to my factory holes. So far I've...
  22. Evildmanarc

    2001 Tahoe LS 4x4 build

    I do, I wish it fit better it came off of a 97 square ish body silverado. And also yeah it might rub, but so far so good anyways no rubbing yet.
  23. Evildmanarc

    2001 Tahoe LS 4x4 build

    **UPDATE** JUST put the ko2s on there and oh my word they set this truck off guts I couldn't be happier!!! ^^ there's about an inch or so of wiggle room so the height is perfect. I could have honestly gone wider because there's about 4-6 inches of space at full steer. But I'm extremely happy...
  24. Evildmanarc

    Question about flare fitment

    My question is would these fit a 2001 tahoe? Would they look weird? Anyone try this ever?
  25. Evildmanarc

    Aluminum radiator question

    HAHAHA because i still need to go get one. Am lazy sometimes but no harm no foul all it needed was a little burping. And so far I'm 3 jugs of 5050 in and she's still thirsty. I'll get more after work. Once everything is dialed in proper I will give cooling differences. I'm sure adding that oil...

Forum statistics

Threads
129,228
Posts
1,812,450
Members
92,330
Latest member
rgeurts

Latest posts

Top