Search results

  1. S

    New cargo area floor.

    OK , It's going in the garbage .
  2. S

    New cargo area floor.

    I'm getting rid of the platform I built for the cargo area, I'm in North/east Jersey.
  3. S

    Alarm ?

    I know the previous owner and he did not add a aftermarket alarm .
  4. S

    Alarm ?

    Thanks for all the replies :cheers:
  5. S

    Alarm ?

    I just discovered this . I've had my Tahoe for a few months and every once in a while I get out and walk away the Tahoe beeps and locks itself. I thought that was odd because I didn't hit the key fob to locked . I realized that I was hitting the lock button on the armrest while getting out and...
  6. S

    Getting ready for lift and tires

    Thanks , did you try it without the spacers ?
  7. S

    DFM, AFM Eliminator

    Hello folks . Starting in 2019, GM made the switch on some 5.3L and 6.2L V8 engines from their Active Fuel Management system to their new Dynamic Fuel Management system. Like the old AFM system, DFM can temporary deactivate and reactivate cylinders to try to help improve fuel economy. While the...
  8. S

    Getting ready for lift and tires

    The flares were not in the way but you are correct about the 9 inch wheels . I think if I went with 265 instead of 275 I would of been ok .
  9. S

    Inverter ?

    I want to run a dual battery system. My question is I want to run cables to the cargo area and install the inverter there , What gauge wire should I run not to loose power going that length ?
  10. S

    New cargo area floor.

    It's just little blocks at the right places, 4 across the front and 2 in the middle . The sides are supported by the seat tracks and rear is supported by the rear body trim step.
  11. S

    New cargo area floor.

    Thanks .
  12. S

    New cargo area floor.

    I've been searching for a way no make my cargo area more flat when the third row seats are removed. When the seats are removed the tracks in the floor stick up and make it uneven. So I decided to make one myself after not finding anything on the Web . Basically took 2 48"x 44 with a hinge in the...
  13. S

    Getting ready for lift and tires

    offset is 31. Here are pics of before and after. I heated the fender liners with a heat gun and it's not rubbing anymore. With a leveling kit .
  14. S

    Inverter ?

    thanks
  15. S

    Getting ready for lift and tires

    No, 20x9
  16. S

    Getting ready for lift and tires

    OMG ,WHAT A NIGHTMARE:flame: , The leveling kit went in no problem but the tires are turning out to be a nightmare. After everything I read and asked the 275/65/20 don't fit , so I went to a 265/60/20 and STILL RUB.
  17. S

    Getting ready for lift and tires

    I'll look into it thanks.
  18. S

    Getting ready for lift and tires

    Ok , everything is on order . Leveling kit ,20" wheels and 275/65/20 tires. Will post pics when it's done. One question , how do I calibrate the speedo afterwards ?
  19. S

    4 inch Rancho lift, 34 inch tires and steel bumpers front and rear.

    thanks
  20. S

    4 inch Rancho lift, 34 inch tires and steel bumpers front and rear.

    Love all the mods you have done , great job. Do you happen to use a power inverter ? I want to install one for camping purposes.
  21. S

    Inverter ?

    Thanks
  22. S

    Cargo Area ?

    Thanks
  23. S

    Cargo Area ?

    Anyone ever modify the rear cargo area to make it more flat ? I rarely use my 3rd row seats so when I have them out to put a big cooler in there the floor isn't even due to the seat tracks and the cooler isn't level . I was thinking of building something low profile to make the floor are flat...
  24. S

    Inverter ?

    Hello , We go camping and was wondering if anyone ever uses a power inverter. I purchased a 2000 watt inverter and just wanted to see if anyone ever had any problems with them . Thanks
  25. S

    Cargo Area Light Mod

    Thanks

Forum statistics

Threads
129,125
Posts
1,810,842
Members
92,211
Latest member
patrickleeleep

Latest posts

Top