Update replaced and now now noise coming from what I thought at first the subwoofer but the Door Blend actuator is right beside the subwoofer which I thought was making strange noises and it now is fixed.
Well I finally got around to removing the console to research why my subwoofer was making a noise but it turns out to be the door blend (Hot/Cold) Actuator. Once all the console was removed it was very obvious that the actuator was making a loud noise. Got a new Actuator on order from...
Thanks man I'm having similar issue. I turn off the engine remove the key and my radio will not turn off when opening the drivers door but if i walk back and open the drivers passenger door the radio will shut of as it should I will go your route and clean my contracts and see it that takes...
Yes the interior lights goes off but radio stays playing but if I open the read driver door it shuts off. Can it be a door switch if so, what is the part number for the driver door switch and do you have to replace the entire door lock mechanism? I have tried pulling both RAP (Retained...
I have noise coming from my Subwoofer with the Factory Radio either off or on. You can heard a rumbling noise coming from the Subwoofer with the volume low and or the radio turned off. Anyone ever had this issue to suggest an remedy?
When looking for a mint drivers door panel sometimes it's hard to see the switches for the pedals in the photos. On the build sheet or serial number what is the destination which show a vehicle comes with this option? Since I purchase my vehicle used it had numerous burn marks on the panel...
After thinking about it the valve port might be on the hole itself Part# ACDELCO 12575527 see here on RockAuto https://www.rockauto.com/?carcode=1431230&parttype=15614
I have a 2005 Yukon SWB 2WD SLT 5.3 gas non flex.
I order a ACDelco 214-1105 GM Original Equipment Vapor Canister Purge Valve
Why does the factory purge valve have a schrader valve and when you purchase a replacement is does not? Is the valve port for using a smoke machine to trouble shoot...
I have a 2005 Yukon SWB 2WD SLT serial 1GKEC13T35R111173 and keep getting and dash code to tighten gas cap. I purchased a new cap ACDelco Gt231 but does not seal all the way. Here is a pic of it tighten. I seem the cap threads needs to be shorter and it will not seat on the seal on the lip...
I'm fixing to replace my with AC Delco #214-1005 which does not have the test valve port. Because I'm getting the Gas Cap message also. The original one does should I get the one that does have it?? if so what the part number needed?? I have a 2005 Yukon SWB 5.3 non flex 2WD.
I have a stock 2005 Yukon SLT with bose radio and the XM radio on certain channels will lose reception. What causes this?
Also can I swap a Denali LUX Bose Navigation Radio in place of my stock unit? Will I be able to install the standard bose subwoofer to this radio??
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.