Search results

  1. B

    Low oil pressure warning alarm

    I have a 2007 Yukon and was experiencing similar issues, after driving for 5 or 6 hours on the highway, arriving at my destination, the low oil pressure warning beep went off and the oil pressure guage was at zero. I immediately turned off the engine and checked the oil level, it was normal. I...
  2. B

    New to this forum with 2007 Tahoe

    I have a 2007 Yukon and was experiencing similar issues, after driving for 5 or 6 hours on the highway, arriving at my destination, the low oil pressure warning beep went off and the oil pressure guage was at zero. I immediately turned off the engine and checked the oil level, it was normal. I...
  3. B

    2007 Yukon Denali stalling

    Thank you so much for your info, and your greetings, back to you :) I will be having the work done by a very qualified mechanic, and I will have the things replaced that you have suggested and see if this issue can be finally dealt with. Thanks again!
  4. B

    2007 Yukon Denali stalling

    All OEM parts
  5. B

    2007 Yukon Denali stalling

    It seems the dreaded P0011 code has reappeared. Not sure what is the next step other than thinking it is a cam chain tensioning issue or the chain is stretched?
  6. B

    2007 Yukon Denali stalling

    The fuel pressure was good. i have no more stalling issues I am just getting the annoying Stabiltrak light followed by check engine light. But now when I go to read the codes there is nothing. No more Code P0011? or no stored codes
  7. B

    2007 Yukon Denali stalling

    The VVT solenoid was replaced and the wiring harness is checked good/ 5 thru 7 not sure about, how would I check these possibilities?
  8. B

    2007 Yukon Denali stalling

    I also replaced the VVT
  9. B

    2007 Yukon Denali stalling

    I am talking about the one that threads into the end of the camshaft, and it has 170K on the motor
  10. B

    2007 Yukon Denali stalling

    No I do not, but I have already replaced the actuator, as well as the camshaft position sensor and the crankshaft postion sensor
  11. B

    2007 Yukon Denali stalling

    I am getting a P0011
  12. B

    2007 Yukon Denali stalling

    I replaced the throttle body and the fuel pump, and the stalling issue seems to have disappeared but I do sill have the stabilitrak light coming on after 20 minutes of driving and after awhile it goes out and then comes on together with the check engine light? Any suggestions? I have read it...
  13. B

    2007 Yukon Denali stalling

    AC Delco Spectra Fuel pump
  14. B

    2007 Yukon Denali stalling

    ok thx I will look into it so far the new fuel pump seems to have solved the problem crossing my fingers
  15. B

    2007 Yukon Denali stalling

    AC Delco or OEM parts
  16. B

    2007 Yukon Denali stalling

    What exactly is the cam phaser? I have replaced the cam and crank position sensors along with the Variable Valve Timing solenoid
  17. B

    2007 Yukon Denali stalling

    Hi yes it has come back on first the stabiltrak light comes on then soon after the check engine light comes on too
  18. B

    2007 Yukon Denali stalling

    Hi thanks for the input, actually the first thing I changed was the fuel pump relay. Today I am putting in a new fuel pump and if that doesnt fix it I dont know where else to look. There is a code stored P0011 which refers to cam position error but I have changed both Cam and Crank position...
  19. B

    2007 Yukon Denali stalling

    I have a 2007 Yukon, 6.2 L engine, which after 10 minutes of driving will stall when you stop for a signal light. The time varies as to when this happens but will definitely happen within 20 minutes of driving. The stabilitrak light will also come on. I used to have to wait 10 minutes before...

Forum statistics

Threads
129,118
Posts
1,810,743
Members
92,206
Latest member
ckylec

Latest posts

Top