Search results

  1. Reyetwinger

    EVAP not ready

    I would just like all the systems to be functioning. Being that I was throwing codes I would like to see all green lights at some point. Luckily right now I don't live in a state that requires all the monitors to be testing to pass inspection. I'm also wondering why I'm not getting a ready since...
  2. Reyetwinger

    EVAP not ready

    Hi. I had a P0138 and P0158 code on my 2020 Tahoe with the 5.3. I took it to the dealer (one month out of warranty) and they cleared the codes and did a fuel system cleaning. They are telling me the gas sat too long and separated. This isn't true but that was their only explanation. The EVAP...
  3. Reyetwinger

    Tire pressure sticker

    Hi. Can anyone who has a last generation Tahoe LS Midnight Edition with Goodyear Duratracs, size 265/65/R18 take a look at the tire sticker in the door and let me know what the cold pressure is supposed to be? I have searched everywhere and it seems without the sticker it's all guesses and...
  4. Reyetwinger

    Lifters

    I order the AC Delco Dexos1 Gen2 0W/20 from Summit Racing. It's a second car for now so I don't put much mileage on it and the oil life indicator always runs down on the time way before mileage. It's probably going to be my last new vehicle as I'm not happy with the direction of anything new...
  5. Reyetwinger

    Lifters

    I have been hearing tons of horror stories about the new generation V8's lifter issues. I have an early build 2020 5.3, are these also having DOD lifter issues? I haven't seen it discussed nearly as much. Thanks.
  6. Reyetwinger

    2019 Custom Midnight thoughts

    Thank you. Believe me I have tried to figure out how to get a 4 post lift in there but I don't have the height. I want to get another car, maybe a GTO but I don't have the room. You can never have too big a garage!
  7. Reyetwinger

    2019 Custom Midnight thoughts

    Thanks. The part# is 23365760, it's pretty expensive. I see a lot of people just cut down the one they have. Since the dealer was swapping everything over from my 19 to 20 I just had him put it on since they were taking the front bumper off anyway. I was going to install it on my 2019, I believe...
  8. Reyetwinger

    2019 Custom Midnight thoughts

    One more thing I did was swap out the stock front air deflector for the much smaller PPV deflector on my 2020. I think that really cleans up the look of the front end.
  9. Reyetwinger

    2019 Custom Midnight thoughts

    I would say this has lag too. There is a slight delay from when I step on the gas to when it does what I want. I had 3 Rams with 5.7's but with the 5 speeds and all with 3.92 rears. I wish my Tahoe went like those did lol. I have no experience with the Dodge 8 speeds though.
  10. Reyetwinger

    2019 Custom Midnight thoughts

    I traded in my 2019 Midnight Edition which had the 3.08's and ordered a Black 2020 LS Custom with the Max Trailer Package which has 3.42's. I had the dealer switch all the Midnight Edition parts from my 2019 to my 2020 so that's why my signature says LS Custom Midnight Edition with 3.42's...
  11. Reyetwinger

    2019 to 2020 trade opinion

    When I got the truck the tab circled in red was on the outside of the lower console. I removed it and put it back correctly.
  12. Reyetwinger

    2019 to 2020 trade opinion

    Lol, yes that's a pretty funny way of looking at it. I don't know where that bolt should be. It doesn't look like it was ever threaded into anything. This dash isn't the tightest I've ever known. There are a lot of bad things that went on during assembly. The console wasn't even put in correctly.
  13. Reyetwinger

    Center stack/console noises

    I would have been happy if it just wedged itself somewhere and stopped rolling around. If this is it even better yet.
  14. Reyetwinger

    2019 to 2020 trade opinion

    I posted on another of my threads that I found a bolt that fell out of the dash on my passenger floor mat today. Something has been rolling around in there driving me crazy and I'm really hoping this is it. The threads on the bolt look like they have never been in contact with anything. I was in...
  15. Reyetwinger

    Center stack/console noises

    Well I took the dash apart a couple of times and put felt everywhere things contact each other. I could not find whatever was rolling around somewhere in the dash on starts, stops, and turns. It continued to drive me mad hearing this thing rolling around. So I took it to a mall parking lot and...
  16. Reyetwinger

    Applique removal

    This is the back side of the one I removed. It is the same as the one I replaced it with. It is the updated part number (84263144) for the drivers front door. At the bottom right of the photo you see a rectangular clip, there should be another one up towards the middle but it broke off during...
  17. Reyetwinger

    Applique removal

    Well just to follow up I finally got around to replacing it. I used a vacuum suction cup to pull/bend the front out just enough to get a trim prying tool behind it without having to pry on the rubber weatherstrip. It was on there very securely and took quite a bit of force to break it free. The...
  18. Reyetwinger

    2019 to 2020 trade opinion

    I was hoping that too. I understand most people don't have issues and that forums are usually the place people complain about the issues they have. But I do see that the same issues are common among the complaints. I would think by the final year of a run they would have figured out how to...
  19. Reyetwinger

    2019 to 2020 trade opinion

    I haven't noticed any difference in the camera between the 19 and 20.
  20. Reyetwinger

    2019 to 2020 trade opinion

    Thanks. I'm surprised in the inconsistency of the build quality between the two considering they are almost the same vehicle. The only issue I had with the 2019 was that the transmission had a delayed shift going from reverse to drive. It would slip and bang into gear on occasion. I took it to...
  21. Reyetwinger

    Applique removal

    Thanks. I had seen those but mine will not move once the screws are removed. I will have to try again. I bought a new one which is the updated piece since I think mine will take damage to remove. There is a vertical weatherstrip right where it looks like I need to pry. I guess I will just have...
  22. Reyetwinger

    Applique removal

    Yup it's a shame. They don't listen or give a crap. I told them no Armorall. I handed them a paper asking no Armorall with a $20, please no Armorall. The truck was slathered in Armorall, even under the hood. That crap never goes away. Everytime I touch something my hands are slimed. The whole...
  23. Reyetwinger

    Applique removal

    I've given that consideration. I have another thread mentioning what happened to my new truck when the dealer had to install some options on delivery. I'm still shell shocked about how much damage was done and am hesitant to let anybody near it, especially for something that's more of a cosmetic...
  24. Reyetwinger

    Applique removal

    Yup I will.
  25. Reyetwinger

    Applique removal

    The 15-20's have had the part updated a couple of times. I am assuming being mine is a 20 that I have the latest one. I know there is some kind of clip behind it and adhesive. I have seen a couple of threads where people say they have removed them in 5 minutes but I must be dense because mine...
Top