Search results

  1. navy34

    Rough Country 6" Installed

    thanks for the compliments fellas. it rides pretty well, sitting about 45 at the fenders right now. im probably gonna throw on a 1.5" BL soon to stop the rub in the front
  2. navy34

    EGR Delete

    Yeah, I was just wondering if there would be harm done without it, since the new headers dont have an egr port...
  3. navy34

    EGR Delete

    Hey guys, do you know if theres any negative effects to removing the EGR system? I got a pair of headers that have AIR, but no EGR, so I was just going to leave it out. I know I'll get a cel, but I wasnt sure if there was any performance loss and/or potential damage to the engine...
  4. navy34

    Zone 1.5" BL

    Has anybody on here ever run it on a hoe? They make them for 99-02 1/2 ton silvys, and apparently fit on same year tahoes.
  5. navy34

    Rough Country 6" Installed

    No man, I didnt use any wheel spacers. The spindles in the front push the wheels out about an inch past the fender, but its no big deal. It cost about 600 to install locally, pretty good deal! Its been a blast so far
  6. navy34

    Rough Country 6" Installed

    I have ford keys in there cranked about 3/4 of the way to clear the tires because of that freaking bumper. Im gonna be cranking then down as soon as I can get it fixed. I grinded it down so that it doesnt rub, but Im gonna have to do some more to clear it when I bring the front end down
  7. navy34

    Rough Country 6" Installed

    Thanks for compliments fellas! They are 35x12.50 trail grapplers and 18x9 addicts with 4.5 inch backspacing(-12mm offset) Ive had some rubbing issues due to my bumper sagging a tiny bit because of a fender bender by the previous owner. Ive managed to grind off some of the bumper at the...
  8. navy34

    crankin torsion bars

    I ran 285's with just cranking my keys to level, which wasnt a whole lot. You could go that route. I personally dont like wheel spacers, not the safest idea imo. Like DaRosa said, you can clear them, but youll probably have to trim a little if you dont want to rub while flexing.
  9. navy34

    Rough Country 6" Installed

    Just got it installed! Rides well so far, lets see if it holds up to the beach...
  10. navy34

    crankin torsion bars

    You can crank, just make sure you dont too much. Check the CV angles, dont wanna be too extreme with those..
  11. navy34

    Subs not hitting

    Yeah, I guess Ill try to switch the fuse out and see. The power wire was pinched a little bit as well, but I dont think enough to do anything. However, when I mess with the ground wire, theres a varying high pitched sound that comes from the amp. I guess Ill try to clean up the ground, see if...
  12. navy34

    Subs not hitting

    none of my friends have any amps, i might try and hit up a best buy or something and see if they have one laying around that i could try out
  13. navy34

    Subs not hitting

    Its 4guage power wire, the fuse looks fine too. i got the 4 guage amp wiring kit from knu concepts, so its legit. The fuse I used came with the kit, Im prety sure its an AGU type fuse. I did notice today that the amp was making a wierd ticking noise when it was sitting there powered up and the...
  14. navy34

    Subs not hitting

    So I've got a question for all the electronic gurus out there. For a while now, my subs ( 2 12" kicker cvr's) hit intermittently. Sometimes they thump really loud and work, then stop after about 30 minutes. It randomly comes on and off and it pisses me off. I dont think the subs are blown, they...
  15. navy34

    295/70/18 trail grapplers

    Your rig looks awesome. I think I'll go with the 295's and the BL since I dont have any rear spacers in.
  16. navy34

    hd hood?

    Well, Im pretty sure it bolts right on. But, since it's for a silverado, youll have to trim up the front of the hood because the yukons headlights are different .
  17. navy34

    295/70/18 trail grapplers

    What do you guys think about that tire (approx 34") on a hoe with a 3"BL? I have ford keys cranked to level, and no spacers in the rear. I'm just not sure if the 295's will look to skinny on there or not.
  18. navy34

    Backup Alarm Siren w/batter

    Thanks man. I guess Ill put both in
  19. navy34

    Backup Alarm Siren w/batter

    Do you guys know if the backup alarm sirens with a built in battery also powers the rest of your alarms system if the power is cut? I just installed a viper 5900 and I want to be able to have the backup siren and have the system(with starter kill) engaged.
  20. navy34

    Cam Help

    Stuff gets in tommorrow, hopeully Ill get it in on Friday! Do you guys know if the harmonic balancer installer from autozone works in getting the pulley back in? I cant find a longer crank pulley bolt anywhere, and I dont really feel like dropping 30 bucks on a longer bolt from ARP.
  21. navy34

    Cam Help

    Awesome, thanks for the help guys. What all do I need in the installation as far as gaskets, bolts, etc? I'm replacing the water pump since I just hit 100k, its probably due anyways so I have those gaskets.
  22. navy34

    Cam Help

    Just boought CompCams 54-412-11 with LS6 Springs and compcam pushrods, hopefully install in the next couple weeks! What kind of dowels did you use and how to hold up the lifters?
  23. navy34

    Cam Help

    Actually, I was eventually gonna get LT headers to compliment the cam, but now I'm not sure what to get first. What do you guys think is the best gains for the money right now, the LT's or the cam? (cant afford both at once...)
  24. navy34

    Cam Help

    So I'm about to pull the trigger on a new cam, springs and pushrods. Is there anyone in SoCal (I live in San Diego) that would be willing to help? I'm handy with a wrench, but I've never done this before.
  25. navy34

    HD Hoods

    If I've got an 01 Z71, do I have to find a 2001 HD hood for it, or will other years work?

Forum statistics

Threads
137,766
Posts
1,991,615
Members
102,756
Latest member
dizhai

Latest posts

Back
Top