Search results

  1. B

    2007 Steering Wheel replacement

    Swathdiver, so you are saying the newer actual wheel is physically the same; I could just swap over my controls, clockspring and airbag and be good to go? Mark
  2. B

    2007 Steering Wheel replacement

    Hi. Trying to get a new steering wheel for my 07 Suburban, p/n 15917931. Cannot seem to locate one, and GM sites all list as "backorder". I can find wheels for 2010-2014 trucks; is there any way to use those wheels? Can I sway my clock spring and air bag to the newer wheel? I'd assume the...
  3. B

    07 Suburban Front Spring Upgrade

    Hi All, I am looking for a set of front spring to make the front of my 07 Sub LTZ a little stiffer (a more sporty feel). I currently have 2in. drop spindles and the McGaughy coil relocators with stock LTZ coils. Are the any companies who sell a stock-height HIGHER RATE front coil spring...
  4. B

    22 inch wheels

    Just enter ck158 in ebay search window. Several come up
  5. B

    Wheel Offset explained??

    Hi guys, hoping somebody can help me understand wheel offset. If my truck ('07 Suburban) has 20x9 wheels with a +30 offset, and I were to install a set of 22x9.5 with a +30 offset, would the extra .5 inch be inboard or outboard? Mark
  6. B

    22 inch wheels

    Just found them on ebay - I am just hesitant on what the finish quality might be like and how well they will balance. Mark
  7. B

    22 inch wheels

    Truck is currently on OEM 20inch LTZ wheels with 275/55/20 tires. Truck sits at Fr 32 1/2 and Rr 33 1/4 - 33 1/2 approximately. Thanks
  8. B

    22 inch wheels

    Hey guys. I am currently looking at 22 inch wheels for my 07 Burban (truck is lowered 3.5 inches front, 4.5-5 inches rear). The wheels I am looking at are the GM Replica ck158 (22x9 with +31 offset) or the DUB Skillz (22x9.5 with +31 offset). I am wondering what the fitment will be like...
  9. B

    Excessive shock rub?

    Hi Tony. Just wondering if you ever got a chance to take those pictures of the relocated E-brake? Thanks, Mark
  10. B

    Front Strut Spacers

    Don't know if this has been done or a silly question. IF I were to use front coil relocators or the strut mod and found it to be too low, could I then add the Bellltech spacers to the top of the stock spring to raise a little? Mark
  11. B

    Lowering-Towing-Helpers-Autoride

    I too have an autoride 07 Burb with the 2/4 kit. Would the install of helper bags help to stiffen the rear springs a little also, if set to 15-20 lbs with no load on the rear? Mark
  12. B

    Excessive shock rub?

    Would also love to see those pics Norcal. My cable also rubs on that shock (but mostly on the lower body, not the bag); It'd be great to have a fix or relocate. Mark
  13. B

    Shock Diameter

    Tony, if I were in Cali, or knew of a machine shop in my area I trusted, I'd likely try that. I also cannot be without my truck for longer than a day, so shipping them to you is out of the question. I value your advice, and have followed a great deal of it in the past; I have also purchased...
  14. B

    Shock Diameter

    Does anyone know the diameter of the Arnott/Bilstein front strut (that replaces the Autoride ones)? I would like to buy a set of the McGaughys strut relocators, but they list 2 P/Ns - one for a LD, one for a HD strut I actually called Arnott; they said "you can't use our shocks on a lowered...
  15. B

    Belltech Camber kit

    Yeah, I understand variances, but I cannot have my truck with a total 3 5/8 lowering - far too low. With the BT springs and both spacers in, the truck came down 1 5/8 inches. Now I have put the original GM springs back in. In your opinion, which of the 2 options below is the best route? 1...
  16. B

    Belltech Camber kit

    Not too sure what that message means Tony?? Full drop, then 1.5 spacers? I am already too low with 2 full spacers in front - using less spacers would bring me lower. Are you referring to the BT SP shocks? Mark
  17. B

    Belltech Camber kit

    Not one I or my mechanic would truct to do that.
  18. B

    Belltech Camber kit

    That's correct. Only the BT springs dropped me over 1.5 inches; if I were just ordering the Arnotts, I would take you up on the offer of the strut mod. However, now that I have the struts on the truck and can't have the truck down for more than a day, I'm looking for the next best option -...
  19. B

    Belltech Camber kit

    Sorry, to clarify, I already have the Arnotts installed on the truck.
  20. B

    Belltech Camber kit

    Thanks Tony, but I could not be without my truck for that long. I need something I can purchase and have installed. Mark
  21. B

    Belltech Camber kit

    Front BT Spring install So-o-o, I installed the BT springs with 2 spacers - the truck came down 1 5/8"!! Way too low and too much rake! I expected with the 2" spindles and these springs to get a 3" total drop in front. I called Belltech (who were Fantastic to deal with btw) - they said...
  22. B

    Autoride Links and Spacer

    Thanks again guys/ Tony, I am lowering the front 1 more inch with the BT springs I already have; I know a lot of people do not go with this option, but if I don't like the ride, I will do the strut option. Intimidator, I assume you've already done the free travel mod out back? Mark
  23. B

    Autoride Links and Spacer

    Thanks guys. Tony, so, even with the autoride links, removing the BT spacer will bring down a further inch? Also, when you say 2.5 inches, you're referring to the Belltech links? Are you currently using those links or threaded rod? Thanks again for your insight. Mark
  24. B

    Autoride Links and Spacer

    Hey guys. Have an '07 2wd Autoride Burbn; I am using the Belltech 2in spindles front, and BT 3/4 spring in rear (spacer is currently in). The Belltech Autoride links are shortened as much as possible currently. I am wanting to lower the truck another 1inch front and back. 2 questions...
  25. B

    Need these FULL tsb's from a dealer please!!

    I think these TSBs would be useful to a lot of people on here who are experienceing the Traction light after lowering. Is there any way someone would post these for all to read - would be a great help!! Thanks, Mark

Forum statistics

Threads
129,259
Posts
1,812,961
Members
92,362
Latest member
Sleeeper

Latest posts

Top