Search results

  1. T

    Radio static

    yes the AM stations now have static as well. Thanks Tbruz
  2. T

    Radio static

    Is there a radio static suppressor somewhere on my 1997 Tahoe 5.7L with stock radio with built in CD unit? All of a sudden I get static on my favorite FM radio stations. Static is not noticeable when the engine is not running. CD sound quality is still perfect( engine off and on)so I can rule...
  3. T

    Fog light wiring 96 tahoe 2dr

    Best bet is to try and locate the TWO stock GM harnesses that plug into the fusebox and headlights. that way the switch itself illuminates when the dash light are on and the switch itself illuminates when the fogs are on. The under hood harness is fairly easy to locate, Its the under dash one...
  4. T

    2 Door exhaust needed

    Updating this thread for future reference. No GM stock available for the muffler/tailpipe combo pn 15742009. I picked up a mint muffler/tailpipe off of a four door figuring I'd make that work; unfortunately the outlet pipe on the 4 door muffler is on the opposite side than the 2-door outlet and...
  5. T

    2 Door exhaust needed

    1997 2 door with 5.7 Engine; truck is 100% stock, 200K miles with just a Denali center console as an upgrade, After 22 years the muffler has finally let go on this vehicle. It was in the south for the 15 years of its life but in NH winters for the past 7 years. I don't really want to spend big...
  6. T

    OBS Fog light set-up(in bumper Z71 style)

    I have a complete set of the in bumper foglights for the OBS Tahoe/Suburban/Silverado. The set includes the fog lights, mounting buckets, switch, switch dash plate(for barn doors) and BOTH the under-hood harness and the under-dash harness; all are in perfect condition with no cuts or splices...
  7. T

    OBS Fog light set-up(in bumper Z71 style)

    Greetings I have a compete set of Z71 in-bumper fog lights for sale for the original body style. Set includes everything mounting buckets, lights, 2 harnesses, switch, and dashplate needed to install in the factory locations. Included is both of the factory harnesses, in mint condition, for...
  8. T

    Heated versus non-heated side mirrors

    Check the lower inside corner of the mirror glass itself if you have the glass heat emblem rectangle with three squiggly lines , its heated. Alternatively you can turn on the rear defroster button, which also controls the heated mirrors and IR gun the mirror glass, you'll see a change in temp if...
  9. T

    DS power seat and Heat(both sides)m FIXED!!

    After some reading up on others fixing their non-functional power seats and seat heat I decided to tackle this today. Removing the DS seat bottom and unplugging the 9 connectors was the toughest part of the fix. 90 minutes later and less that $6 bucks worth of parts the DS side power is fully...
  10. T

    A/C rebuild

    Let me know if you’re interested in the condenser. Thanks Tbruz
  11. T

    A/C rebuild

    drakon543, I have a brand new ACDelco condensor for the OBS style tahoe that I cannot use. Will sell to you for $50 and you pay shipping costs from NH. Thanks Tbruz
  12. T

    Part number for center console cup holder insert?

    Mint one is not glued and zero broken tabs. this one is glued with broken tab and no rubber inserts but it does hold a bigger can/drink than the mint one Thanks Tbruz
  13. T

    Part number for center console cup holder insert?

    There are a couple on EBAY right now for 35 to 40 bucks. Both appear to have some broken tabs and no rubber inserts item numbers 302942969920 and 253983133756 You can also buy the rubber inserts on ebay for $10. They are a bit thinner than OEM but they do work. eBay item number: 382630165208...
  14. T

    ABS controller needed

    I have replaced the DS hub and WSS, the ABS light is off and the ABS works perfect. Still chasing down why I cant communicate with the ABS module via OBD; not quite as important at the moment as I have no lights or codes to review. Thanks Tbruz
  15. T

    ABS controller needed

    I measured the Wheel speed sensors manually tonight. I've read they should read 1K to 3 k ohms at the connector and display greater than 400mV AC when the wheel is spun by hand. Passenger side hit those measurements exactly, drivers side was open loop and only showed 200 mV AC when spun. I...
  16. T

    ABS controller needed

    I should have been more clear, here's the sequence and results Step 4 yes Step 5 yes Step 6 no--jump to step 8 Step 8 reconnect everything Step 9 yes step 10 NO jump to step 14
  17. T

    ABS controller needed

    I am getting the proper voltage to EBCM per step 4. All steps are good until step 10 and fuse 18 is not blown.
  18. T

    ABS controller needed

    Thanks East302, Lots there for me to absorb. Brake light work perfectly. and fuse 18 is good as well. Wondering out loud here but since I cant communicate with the ABS module I also cant see any brake DTCs. Is it possible that I have a shorted wheel speed sensor as the culprit of all this...
  19. T

    ABS controller needed

    So in following the troubleshooting tree above all is good until step 10 where there should be an OL reading between pins A and Ground(J). I'm getting 1.46K ohms. Step chart says go to step 14 and clear the short to ground in CKT 441. So the next question is where is CKT 441 and whats the best...
  20. T

    ABS controller needed

    Thanks for the step chart above. No codes are set, only the ABS light is on. There is no communication with the original ABS module or the JY one. Will try the troubleshooting sequence tomorrow night. Tbruz
  21. T

    ABS controller needed

    I received and installed the JY ABS controller tonight with no change in the ABS status; the light is still on indicting no ABS function. Since I can't communicate with two controllers now, I'm at a loss for next steps: 60 amp ABS fuse under hood is confirmed good. Searching for a willing...
  22. T

    ABS controller needed

    I've got a unit coming to me from a Southern JY in the next day or so. I have already popped off the ABS module on my ride so it will be an easy swap once it arrives. There are probably 25 companies that rebuild the 99 onward Kelsey Hayes 325 units but no one rebuilds the 94-98 chevy with...
  23. T

    ABS controller needed

    Thanks for that lead Doubeleive, I may have to get a JY one if I cant locate a rebuilder. Tbruz
  24. T

    ABS controller needed

    Have not been able to locate one that rebuilds 1997 ABS. Found a couple that rebuild GM 1999 to present. Tbruz
  25. T

    ABS controller needed

    Are they rebuild-able? is there a kit?

Forum statistics

Threads
138,115
Posts
1,999,468
Members
103,038
Latest member
Conedaddy

Latest posts

Back
Top