[SOLVED] Backup camera wiring

Jdsfx1 · May 22, 2026

I’m wanting to install an OEM backup camera on my 1941 Cadillac project ( it’s on a 2008 Yukon Denali). I have all the stock Yukon wiring, except I’ve deleted the harness for the lift gate. I want to wire the camera directly to the rear harness. My challenge is that the camera I bought (OEM replacement) wiring colors don’t match the wiring diagrams I have. Doesn’t anyone have, or know, the pin-outs for the camera?

Pic for those curious…..

Jdsfx1 · May 22, 2026

This is the camera I purchased

mikez71 · May 22, 2026

Jdsfx1 · May 22, 2026

Thank you! That’s certainly helps. I tried hooking it up according to this diagram but it’s not recognizing the camera. Maybe the white wire (not shown on the diagram) needs to connect to something? The white wire doesn’t seem to be shown on this diagram.

mikez71 · May 22, 2026

What is the camera from? Is it a stock GM camera?
And what are you using for a display screen?

Jdsfx1 · May 23, 2026

Camera is a stock replacement for 08 Yukon I got from eBay. The display is a new Boss CarPlay unit from crutchfield with the proper adapters to interface all factory functions (steering wheel controls, etc).

Jdsfx1 · May 23, 2026

Update, camera is working. Using the diagram I have and the diagram provided I was able to get it connected and working. If anyone else ever needs the pin-out from the camera, you can ignore the white wire, it isn’t used.

[SOLVED] Backup camera wiring

Jdsfx1

Member

Jdsfx1

Member

mikez71

Full Access Member

Jdsfx1

Member

mikez71

Full Access Member

Jdsfx1

Member

Jdsfx1

Member

Similar threads

Forum statistics

Latest posts