J
Jimxms
Latest activity Postings About
-
-
JJimxms replied to the thread Arnott Suspension bypass module not working - CEL U0122.For anyone else in this situation, I binned the Arnott module and soldered a 25w 3.9ohm resistor on each of the suspension strut...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....Its kinda a moot point anyway tbh, as even when I upgraded all of the wiring with 0/1AWG it's still making the noise :( I'll try and...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....I don’t think 0 would be remotely possible. Even touching my multimeter probes together has 0.1 resistance. The 0/1 awg copper wire I...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....All of the accessories, tensioners and idlers have been replaced. If i remove the cable from the alternator the noise instantly stops...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....That’s right…well kinda. I never heard it through the radio until I was listening to an FM station that I drove out of range of. Then...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....Sadly not, I purchased a brand new AC Delco and WAI unit both from different vendors.
-
JJimxms posted the thread Arnott Suspension bypass module not working - CEL U0122 in Street Suspension.I just removed my Z55 suspension and replaced it with an Arnott/Bilstien kit (C-3184). This came with a bypass module that taps into the...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....Bit of an update....I did the "big 3" upgrade using 0/1AWG wire and i think the noise has decreased. It seems to only whine (but at a...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....Ok guys I did some more testing today, and I'm still stumped. * I sprayed water on the alternator pulley and belt. It didnt make any...
-
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....Yeah I load tested the battery, and have even run the car without the battery connected. If the alternator is whining because its under...
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....That’s a really odd one! Was your whine only while driving?
-
JJimxms replied to the thread Alternator whine - but its not the usual suspects.....The belt I’m using is a Bando 6PK2370, alternator is ACDelco 335-1196 and the idlers and tensioners are all ACDelco too. In my original...
-
JJimxms posted the thread Alternator whine - but its not the usual suspects.... in Engine & Drivetrain.I've been chasing down an annoying whine on my (new to me) 07 Escalade for about a month now. The whine is 100% alternator related, as...
-
JJimxms replied to the thread Are motor mounts easy to replace with exhaust manifolds removed?.Sounds like I should get motor mounts ordered then. Maybe I should order a clamp kit too for the manifolds just in case? Where can I...
-
JJimxms posted the thread Are motor mounts easy to replace with exhaust manifolds removed? in Engine & Drivetrain.I’m about to replace the crusty exhaust manifolds on my 07 Esky. I can see the drivers side one looks like it should be easy to replace...
-
-
Loading…
-
Loading…
