Recent content by builds4christ

  1. builds4christ

    Radio recommendations... Again...

    Gotcha, do you happen to know if it reatinsnfull function on the rear screen? Sorry for the late reply.
  2. builds4christ

    Radio recommendations... Again...

    Talking with crutchfield right now and they don't have any dual zone radios that fit my dash anymore. He said they're rare anymore. Weird
  3. builds4christ

    EVAP Charcoal Canister Removal Modification

    Copy that makes sense. So the logic on the evap system will still open the vent even if the purge is told not too? I could see if that's tunable. That seems like the best setup.
  4. builds4christ

    Radio recommendations... Again...

    Ok I'll look at those. I read in the sticky that the MRR doesn't retain Bose though right? I'll look again.
  5. builds4christ

    Radio recommendations... Again...

    Hey all, I know this has been asked a lot. I've never owned a vehicle with such a difficult system to upgrade lol. I've been looking for a system that retains all OEM functionality, but adds all the goodies like AA and all that jazz. I purchased the best available option from Phoenix...
  6. builds4christ

    EVAP Charcoal Canister Removal Modification

    Gotcha thanks for the info. That makes sense. So incap off the port on the intake, but what about the purge valve?
  7. builds4christ

    Adding an aftermarket radio to 07-14 FAQ

    Man this is killing me. I've never owned a vehicle with such a difficult system to upgrade lol. I purchased the best available option from Phoenix recently. They assured me that it would reatin all OEM functionality. When I installed it, it did not retain it. I have the Y91 rpo code, full...
  8. builds4christ

    Running lean

    Hey DK. I am unsure of the plugs (brand or mileage), but the 02 sensors are Walker. I have verified pressure at the rail to be steady at around 58 psi, if memory serves, but I have to look again. I checked fuel pressure and verified the number, but can't quite remember what the number was lol...
  9. builds4christ

    Running lean

    Haha no worries, I almost imploded my engine with vacuum lol!
  10. builds4christ

    Running lean

    Thanks all. I'll check out all your stuff. I removed the check valve from the breather (clean) side. Definitely ran better and stopped bogging. Vacuum died down a bit in the crankcase as well. It makes sense. If the dirty side is going to be alternating from suction to static (because of the...
  11. builds4christ

    EVAP Charcoal Canister Removal Modification

    I'm kinda thinking of deleting as well. I can tune the purge solenoid out, but where should I disconnect the hoses and let it vent? I'm a little confused on what the delete actually entails. Mine is an 08 yukon 6.2L.
  12. builds4christ

    Running lean

    Yeah I agree. I think maybe the pcv system is screwed up man. When it was setup stock, the port on top of the intake was attached to the rear PCV without a check valve. Not surprisingly, the reason main is leaking haha. I wonder what the best approach for this is. I could return things to...
  13. builds4christ

    Running lean

    Alright, got some stuff to report. Drove it today and it ran badly. A couple things to note. There was surging for one and LTFT were still showing the ECM pulling fuel. Not much has changed. Got some questions though. I was idling and decided to check the purge solenoid position. It was...
  14. builds4christ

    Running lean

    Hmmmm. Dang it. Well, let's see. The stuff should be coming tomorrow morning. I'll report back.
  15. builds4christ

    Running lean

    I think we're on to something. So during the time it was initially screwing up the LTFT, both were PCV's going into the inlet of the charger. Right now it's setup so that both PCV ports are going to the intake port. No check valve. Just a tee and a catch can. Haven't run it like this yet, but...
See more

Forum statistics

Threads
137,710
Posts
1,990,172
Members
102,701
Latest member
vsaravia

Latest posts

Back
Top