Recent content by 1992rs

  1. 1992rs

    Negative camber only in reverse?

    Didn’t see the pictures before I replied. That’s a head scratcher for sure to be that far away from spec and maxed out. I’d say aftermarket cams is the best solution for the time being. Sent from my iPhone using Tapatalk
  2. 1992rs

    Negative camber only in reverse?

    That was going to be my next suggestion. Something like the belltech cams, and open the slots on the frame a little more. To be quite honest, I feel like the tech didn’t know what he was doing or too lazy to put in the work. There’s really no reason why it wouldn’t align into spec. I’ve...
  3. 1992rs

    Negative camber only in reverse?

    How much do you trust your alignment tech? Looking at the sheet, it looks like they barely adjusted anything. They should be able to pull some caster out to gain some more positive camber. Aligning a wishbone like these trucks are kind of a push-pull situation, take caster, get camber and vice...
  4. 1992rs

    Negative camber only in reverse?

    If everything checks out as tight, installed correctly AND you have not precisely adjusted your tie-rods since the refresh, id blame it on excessive toe. Happened to me before. An alignment fixed it. Sent from my iPhone using Tapatalk
  5. 1992rs

    3/5 and 285/45/22 or 305/40/22 on tbss reps?

    Couple thoughts I’m sure plenty of people have put 305/40/22’s on 9” wheels over the years, but that is truly too wide of a tire. For one, the tire manufactures list a 10” as the minimum width for that tire. A pretty wifey accepted rule of thumb is, for optimal performance, you want to get your...
  6. 1992rs

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    I like this setup better, but agree 22’s would split it in the middle. What tire size on the 20’s? 285/50? Sent from my iPhone using Tapatalk
  7. 1992rs

    2016 Yukon Denali Rear squeaking noises after 2 inch lowering kit

    Did you loosen and re-torque all the bolts to the control arms and panhard bar after you lowered it? Even though 2 inches isn’t a huge drop, the theory is that the bushings are pre-loaded at a certain height and the change in ride height without re-torquing them puts them in more of a bind. It’s...
  8. 1992rs

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Stainless set screws recessed in a little bit, Teflon tape, little bit of rtv for redundancy. No leaks for me. Sent from my iPhone using Tapatalk
  9. 1992rs

    Tahoe Depo Headlight Mod

    It was (maybe is still) popular in the retrofitter scene to mod/make new cut off shields in order to modify where the hotspot sits, create a sharper cut off line, create a rainbow effect at the cut off line, increase or decrease foreground limiters. All different reasons really, whether it was...
  10. 1992rs

    Convert 4WD to 2WD

    No gmt800 suv was ever made with coil springs, only torsion bars. If you look at the official drop guide thread, jkmotorsports clearly states he is dropped with spindles and keys. Good news is, the only difference between the two is the hub (it’s really the same hub except for no provision for a...
  11. 1992rs

    07+ Brake upgrade on a 00-06 NBS, is it worth it?

    I haven’t priced out zr1 calipers and pads, but it wouldn’t surprise me. The brackets are reasonable-ish and the rotors are oe big brake kit so those can’t be too terrible on price either. I agree. I’m surprised it took this long and the k2xx big brake kit hasn’t becoming more popular yet...
  12. 1992rs

    07+ Brake upgrade on a 00-06 NBS, is it worth it?

    https://ctsvbrakeswap.com/collections/gm-truck-suv-kits/products/gm-truck-suv-6-piston-c6-zr1-caliper-big-brake-bracket-kit Sent from my iPhone using Tapatalk
  13. 1992rs

    Need to soften Z71 suspension out of necessity

    Concentrate on shocks first for sure, but check to see which torsion bars you have. There should be a tag on it with 2 letters. GMFS has a page called torsion bar 401 and you can cross reference which bars you have and how they rank amongst stiffness. I know my Denali, and id bet most of the...
  14. 1992rs

    RENAMED!! The adventures of Chase and his 2006 Yukon XL Denali!! Follow along on my travels!

    +1 never had to remove the windows/regulators to get to the handles. Always used either a 1/4 ratchet or a wrench. Sent from my iPhone using Tapatalk
  15. 1992rs

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Lowes in Milwaukee Sent from my iPhone using Tapatalk
See more

Forum statistics

Threads
129,117
Posts
1,810,709
Members
92,203
Latest member
firedog9518

Latest posts

Top