-
-
builds4christ replied to the thread Radio recommendations... Again....Gotcha, do you happen to know if it reatinsnfull function on the rear screen? Sorry for the late reply. -
builds4christ reacted to Doubeleive's post in the thread Radio recommendations... Again... with
Like.
Cruchfield are robbers anyway, you can find the w8500, w8600 out in the wild still. And a double din is a double din it might need a... -
builds4christ reacted to kbuskill's post in the thread EVAP Charcoal Canister Removal Modification with Like.
I'm not certain that you can turn the purge valve off in the tune, perse. You can, however, tell the ECU to ignore all codes associated...
-
builds4christ replied to the thread Radio recommendations... Again....Talking with crutchfield right now and they don't have any dual zone radios that fit my dash anymore. He said they're rare anymore. Weird
-
builds4christ reacted to kbuskill's post in the thread Adding an aftermarket radio to 07-14 FAQ with Like.
Maestro RR and any aftermarket headunit you prefer. I was running a Kenwood with the Maestro before changing it out for the Phoenix...
-
builds4christ replied to the thread EVAP Charcoal Canister Removal Modification.Copy that makes sense. So the logic on the evap system will still open the vent even if the purge is told not too? I could see if...
-
builds4christ reacted to kbuskill's post in the thread EVAP Charcoal Canister Removal Modification with Like.
If the purge valve is sealing properly then it is it's own "cap", assuming you tune it to never open. Or you could remove it and cap the...
-
builds4christ replied to the thread Radio recommendations... Again....Ok I'll look at those. I read in the sticky that the MRR doesn't retain Bose though right? I'll look again.
-
builds4christ reacted to Doubeleive's post in the thread Radio recommendations... Again... with Like.
Maestro rr & pioneer or kenwood double din, like the wnex 8400/8500
-
Hey all, I know this has been asked a lot. I've never owned a vehicle with such a difficult system to upgrade lol. I've been looking...
-
builds4christ replied to the thread EVAP Charcoal Canister Removal Modification.Gotcha thanks for the info. That makes sense. So incap off the port on the intake, but what about the purge valve?
-
builds4christ reacted to kbuskill's post in the thread EVAP Charcoal Canister Removal Modification with Like.
No reason to vent it as there is already a vent solenoid on the tank. You could just cap it off under the hood where you disconnect it...
-
builds4christ replied to the thread Adding an aftermarket radio to 07-14 FAQ.Man this is killing me. I've never owned a vehicle with such a difficult system to upgrade lol. I purchased the best available option...
-
I don't know what these are supposed to pull, but I would assume 18-21 inHg. Can you elaborate more on the history....how long have you...
-
builds4christ replied to the thread Running lean.Hey DK. I am unsure of the plugs (brand or mileage), but the 02 sensors are Walker. I have verified pressure at the rail to be steady...
-
-
Loading…
-
Loading…
