What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Chrome SS 20's ??? ( tired of mine)
I'm leaning more towards painted, my truck doesn't look good with chrome.
M Hankel
Full Access Member
Thanks, I like this one much better also. The center lid is taller and makes a great arm rest.
As it turns out I actually found the glove box and trim pieces needed for a good price locally, 65.00 for the glove box and under the steering column piece. Too good to pass up and the color matches the console. Pretty happy with the results.
---------- Post added at 11:07 PM ---------- Previous post was at 11:05 PM ----------
Wish I would have installed one sooner lol.... Love this new console.
Mike
Last edited:
YukonXL04
The Riverboat
Hey, how much do you want for the old glove box panel?
Red_Raider
Full Access Member
Getting the front end worked on today. New upper and lower ball joints and an alignment
M Hankel
Full Access Member
I'm just going to keep it for the time being.
I dropped this off at the machine shop last week along with the rotating assembly. I found a complete/disassembled 6.0 LQ4 and picked it up a couple weeks ago. Going to keep the stock bore and add an LS2 rotating assembly, ported heads and cam etc.. Should work well with the T56 swap and rear gears.......... 100' 2nd gear burnouts anyone?
Mike
Last edited:
YukonXL04
The Riverboat
I'm just going to keep it for the time being.
I dropped this off at the machine shop last week along with the rotating assembly. I found a complete/disassembled 6.0 LQ4 and picked it up a couple weeks ago. Going to keep the stock bore and add an LS2 rotating assembly, ported heads and cam etc.. Should work well with the T56 swap and rear gears.......... 100' 2nd gear burnouts anyone?
[/URL]
Mike
Sweet!
Red_Raider
Full Access Member
Well the guy I bought the z71 valance from was "too" busy and never shipped it. I got my money back for it though. So the search begins again :sigh:
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Bomba02
Full Access Member
- Joined
- Mar 27, 2013
- Posts
- 371
- Reaction score
- 9
Got home to these staring me in the face,
Boom, hopefully this weekend I can install.
On another note I drove it to the store, shut it off went into store, came out and smelt something burning, went to leave and none of my dash worked and I had an electrical burnt smell. NOT FUN. Gay gotta dig into that. Is there a main fuse for the entire dash?
Boom, hopefully this weekend I can install.
On another note I drove it to the store, shut it off went into store, came out and smelt something burning, went to leave and none of my dash worked and I had an electrical burnt smell. NOT FUN. Gay gotta dig into that. Is there a main fuse for the entire dash?
dawgofnate
Member
Got home to these staring me in the face,
Boom, hopefully this weekend I can install.
On another note I drove it to the store, shut it off went into store, came out and smelt something burning, went to leave and none of my dash worked and I had an electrical burnt smell. NOT FUN. Gay gotta dig into that. Is there a main fuse for the entire dash?
No teaser shots of a box. Not allowed buddy. ha ha..
and sorry to hear about the burning smell. Thats not good. Check all wiring if you have aftermarket stereo. Really dont know.
Bomba02
Full Access Member
- Joined
- Mar 27, 2013
- Posts
- 371
- Reaction score
- 9
Its teasing me, so i figured id tease you guys....lol
No aftermarket wiring at all all stock, have some stuff switched over to blue led (which i gotta finish) buts thats been like 5 months now. Stupid but ill figure it out if its not one thing its the next.
Billy
02 Burb
Full Access Member
ha ha.. .WHAT??? Just open the box, ha ha...
(just messing with you)
Changed my shocks to 15 settings & Drove a 14 Sierra Denali w/ 6k miles---- Very nice, makes me want a new one. But $45k, not yet
Threw a new of LED's in cuz one of my DRL's burnt out. Picked up the boat and heading out in the morning for some fishin'
I also love the the new Sierra's but can't swallow the north of 40K price tag for a loaded SLT even....
I also love the the new Sierra's but can't swallow the north of 40K price tag for a loaded SLT even....
Threw a new of LED's in cuz one of my DRL's burnt out. Picked up the boat and heading out in the morning for some fishin'
I also love the the new Sierra's but can't swallow the north of 40K price tag for a loaded SLT even....
Sounds like a nice calm day & yep i cant either $40 for a truck.
Getting a feeling the new generation Sierra may be my next vehicle. The 2015 Yukons are just a bit steep as well.
Ordered a few new toys over the last week. Some blend door actuators, a stainless steel nerf bar (we'll see), some WeatherTech deflectors, and an esky roof rack. I'll get down and dirty with it all next Thursday when I'm off.
Edit: Did the deflectors. Not a great pic, but I'm happy with them. Front ones went in as expected, very perfect fit. For the rear I was under the impression that there may or may not be adhesive to position it. However, I instead had "retaining clips" and 2 holes in each deflector, and instructions that had poor pictures. Eventually figured it out and got the drive side near perfect and the passenger side perfect. They really go well with the onyx black, I'm excited about that. Very low profile look, very sleek. Really interested to see how noticeable the sun effects are on the interior as well as the wind and weather. We shall see!
Ordered a few new toys over the last week. Some blend door actuators, a stainless steel nerf bar (we'll see), some WeatherTech deflectors, and an esky roof rack. I'll get down and dirty with it all next Thursday when I'm off.
Edit: Did the deflectors. Not a great pic, but I'm happy with them. Front ones went in as expected, very perfect fit. For the rear I was under the impression that there may or may not be adhesive to position it. However, I instead had "retaining clips" and 2 holes in each deflector, and instructions that had poor pictures. Eventually figured it out and got the drive side near perfect and the passenger side perfect. They really go well with the onyx black, I'm excited about that. Very low profile look, very sleek. Really interested to see how noticeable the sun effects are on the interior as well as the wind and weather. We shall see!
Last edited:
Mechahead
Member
Put in a new radiator and I think I found what cracked my old one. The core support is moving around a bit as it appears both of my fenders have cracked where the core support meets up with them. Now to figure out how to stop it from moving until I get new fenders for it.
Similar threads
