What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Vincesrg03
Full Access Member
Installed the clear bumper lights. Looks so much better, especially at night.
ajaxnxs
Full Access Member
Real nice tails
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Sent from my SAMSUNG-SGH-I727 using Tapatalk
*I did have an issue with the install. The notches on the bulb plugs were not quite right on one of the sockets.. I had to widen the notches on the housing where the bulb sits, to make them fit in the housing. Took maybe 30 seconds per side.. And it was only one of the sockets, the other 2 fit fine.
But for $65 shipped, it wasnt a big deal.
But for $65 shipped, it wasnt a big deal.
JochenWoern
Full Access Member
Those tails look awesome, VERY NICE!
Big Buttons
The SS Burb
mOar leds
I accidently bought the #74 bulbs for the door instead of the 194 bulbs they should be but i made them work. Still bright as shit...
Drivers door
Driver rear
Pass front
Pass Rear
I also did my master switch in the drivers door
I accidently bought the #74 bulbs for the door instead of the 194 bulbs they should be but i made them work. Still bright as shit...
Drivers door
Driver rear
Pass front
Pass Rear
I also did my master switch in the drivers door
Big Buttons
The SS Burb
Got them from DDM tuning they're just a single smd. You can get them with more smd's on them if you want brighter.
Kman
Full Access Member
Biggins, since you posted those light pics made me remember something.
The light that lights up my AC button on my dash is out. How hard is that to change? How do I do it?
The light that lights up my AC button on my dash is out. How hard is that to change? How do I do it?
domin8
Just Plinking
- Joined
- May 9, 2011
- Posts
- 6,038
- Reaction score
- 14
Drove it in the rain.
Sent from my myTouch_4G_Slide using Tapatalk
Sent from my myTouch_4G_Slide using Tapatalk
Big Buttons
The SS Burb
If you dont have the computerized controled one and you know how to solder then you can do it by following this:
http://tahoeyukonforum.com/forum/showthread.php?t=16839
05Yukon23
Full Access Member
Installed shocks. Less rattle from the toolbox now!
Kman
Full Access Member
Thanks! Looks like a major hassle!
Big Buttons
The SS Burb
Not really you need 8 5mm leds, 3 330 ohm resistors, heat shrink, wire cuters, and a solder gun. one of the easiest switches to do this mod to.
mharders
Full Access Member
Just ordered some TYF decals from ecordell
Rivieraracing
Full Access Member
Didn't do anything with my denali today but I might have recruited another tahoe owner to the site!! I met up with him down here in portland to sell some headrest monitors and he pulls up in a pretty nice light gray 2000 tahoe NBS with rims, so of course I had to try to recruit him on here!!
He lives in Seattle, was down here for a tournament of some sort and saw my ad, hope he joins on here!! His name is Chris, so naturally I though he was a pretty cool guy!!
He lives in Seattle, was down here for a tournament of some sort and saw my ad, hope he joins on here!! His name is Chris, so naturally I though he was a pretty cool guy!!
JochenWoern
Full Access Member
Didn't do anything with my denali today but I might have recruited another tahoe owner to the site!! I met up with him down here in portland to sell some headrest monitors and he pulls up in a pretty nice light gray 2000 tahoe NBS with rims, so of course I had to try to recruit him on here!!
He lives in Seattle, was down here for a tournament of some sort and saw my ad, hope he joins on here!! His name is Chris, so naturally I though he was a pretty cool guy!!
If he is only half as cool as you, he will be a good man to have on board.
Rivieraracing
Full Access Member
Kman
Full Access Member
Any idea what color and brightness the stock light is? I'd like to replace it with the stock color and brightness.
Similar threads
