My 2025 3.0l Yukon often sits unused 1 to 3 weeks while out of town. Is there a way to crank the engine with no start to get the oil circulated a bit after sitting? Would there be any benefit in doing this under these circumstances?
How to Crank Without Start?
- Thread starter Javelina
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Stbentoak
Full Access Member
- Joined
- Jul 20, 2020
- Posts
- 2,279
- Reaction score
- 2,772
I have a seasonal vehicle that sits sometimes four to six months at a time. I keep it on a CTEK tender at all times. When I get to my destination, I just crank it start it and drive it. No Ill effects after 9 years. I think you're overthinking it.....
- Joined
- Aug 2, 2018
- Posts
- 10,543
- Reaction score
- 15,302
^^^^^x2^^^^^
Just keep a battery tender on it, and when you do fire it up, let it sit and idle for at least a few minutes to get fluid flowing and coming up to temperature, before you drive it down the road.
Just keep a battery tender on it, and when you do fire it up, let it sit and idle for at least a few minutes to get fluid flowing and coming up to temperature, before you drive it down the road.
- Joined
- Dec 31, 2025
- Posts
- 710
- Reaction score
- 660
1 or 2amp tender
ReaperHWK
Full Access Member
- Joined
- Oct 14, 2020
- Posts
- 997
- Reaction score
- 1,234
Or you can unplug the fuel injectors.
probably 10 different fuse that could be pulled in the fuse box that would cause it to turn over and not start, no need to make it harder than it needs to be.
OP
OP
There's a thought. Maybe # 87 & 90 feeding the Injector ECMs.
Wouldn't this flood the cylinders with fuel? Hydrolock? Wash down the cylinder walls with fuel?
strutaeng
Full Access Member
That's what I was wondering too. It wouldn't hydrolock because unburnt fuel would get expelled on the exhaust stroke. But fuel washdown would be a concern.
Either disable the injectors, or maybe get a relay tester that allows you to jump the relay manually and crank it...
But let's take a step back @Javelina Why can't you just just fire it up and let idle for 5-10 minutes? You'll get lubrication to the engine, burn off any condensation or moisture, and will get everything nice and toasty to deter mice and rats from trying to nest inside the engine compartment (big problem at some locations), plus charge the battery if not on a tender.
I really wouldn't even trip on 1 to 3 weeks at a time, mine have been driven like that for decades because i always have at least 3 and can only drive 1 at a time, so it might sit there days/weeks, especially if it's on empty lol
Similar threads
