What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Rocket Man]

I replaced the R.F. cv axle shaft since it was a year ago that the other one blew up. While I had the wheel off, I rotated the tires and adjusted the torsion bars properly. It had a floating front end feel, I found the bump stops were not touching the control arm at all. After adjusting that, I let the LQ9 clear its lungs and took it out on the highway. Now it needs a good cleaning.

Does it feel better now?

 

[blueinkd]

Replaced bearing in idler and AC View attachment 263155

Part # on the bearings used??

 

[Jason in DLH]

Anybody tried this for the transmission ?

https://autotroop.com/how-to-reset-transmission-control-module-chevy/

I did it last month. Not sure if it did anything though. But I tried it nonetheless.

 

[iddqd]

Part # on the bearings used??

AC pulley bearing: 6001-2RS
Idler pulley bearing: 6203-2RS

If you are absolutely crazy (like I am), you can also replace a plastic tensioner pulley with this one:
DAYCO 89051

It's from some Ford, but made of steel with a replaceable bearing. Fits perfectly on our LS tensioner.

 

[Mezzo]

Picked up an Esky center console today for 50 bucks,this thing is going to need some SERIOUS cleaning.

 

[Mezzo]

Update it just keeps getting worse,found sunflower seeds.

 

[Tonyrodz]

Picked up an Esky center console today for 50 bucks,this thing is going to need some SERIOUS cleaning.


View attachment 263269 View attachment 263270 View attachment 263272 View attachment 263273 View attachment 263274

Wow!! $50? Def not from a junkyard! I bought one and it also was filthy. I took it completely apart and scrubbed it. I soaked the ashtray and whatever else came apart in a bucket of water. Came out looking brand new.

 

[Fless]

Picked up an Esky center console today for 50 bucks,this thing is going to need some SERIOUS cleaning.


View attachment 263269 View attachment 263270 View attachment 263272 View attachment 263273 View attachment 263274

Looks like you got a free lunch with it, or at least snacks!

 

[Dantheman1540]

Wow!! $50? Def not from a junkyard! I bought one and it also was filthy. I took it completely apart and scrubbed it. I soaked the ashtray and whatever else came apart in a bucket of water. Came out looking brand new.View attachment 263275 View attachment 263277 View attachment 263278

Dang, that was a junkyard pull!? Looks brand new!

 

[Mezzo]

Wow!! $50? Def not from a junkyard! I bought one and it also was filthy. I took it completely apart and scrubbed it. I soaked the ashtray and whatever else came apart in a bucket of water. Came out looking brand new.View attachment 263275 View attachment 263277 View attachment 263278

It came from the same esky I got my thrid brake light from,its cleaning up alright,I think i wouldve preffered yours.This think is disgusting.

 

[DutchSchultz]

Looking better already . Mine was pretty nasty . Some parts still are LOL . But it’s a beater .


Sent from my iPhone using Tapatalk

 

[Mezzo]

And its done

 

[915_Tahoe]

EXCTRACTED

 

[Rocket Man]

EXCTRACTED

View attachment 263286 View attachment 263287

It’s a lot easier when the heads are off, huh? There’s a couple on mine that I can’t get a straight shot at with a drill. I had to use the damn clamps.

 

[915_Tahoe]

It’s a lot easier when the heads are off, huh? There’s a couple on mine that I can’t get a straight shot at with a drill. I had to use the damn clamps.

I was gonna use the clamp, but then I noticed 2 were missing not just the one so I just did it the correct way. Turn around time was a day in a half.

 

[Rocket Man]

I was gonna use the clamp, but then I noticed 2 were missing not just the one so I just did it the correct way. Turn around time was a day in a half.

Yeah well I’ve got a Whipple and some of the bolts that hold it to their intake are almost impossible to get to; 2 that are under the left side where the intake plenum overhangs and 2 in the back under the firewall. It took me all day just to R&R the thing last time and I’m in no hurry to do it again. So clamps will be fine lol.

 

[Tonyrodz]

Dang, that was a junkyard pull!? Looks brand new!

Nah, I got it from a guy who was parting out an Esky, but it was pretty nasty.

It came from the same esky I got my thrid brake light from,its cleaning up alright,I think i wouldve preffered yours.This think is disgusting.

View attachment 263282 View attachment 263283 View attachment 263284

Mine wasn't much better when I 1st got it. I took it COMPLETELY apart. Every single part that could come off, did.
Yours came out really good, nice and clean. What year did it come out of?

 

[Mezzo]

Nah, I got it from a guy who was parting out an Esky, but it was pretty nasty.

Mine wasn't much better when I 1st got it. I took it COMPLETELY apart. Every single part that could come off, did.
Yours came out really good, nice and clean. What year did it come out of?

I believe it was an 03,when I first went to the Esky and got my brake light,cluster,and appliques the whole thing was in one piece,its been 2 weeks since then,he scrapped the truck and just kept a few odds and ends on it,doors and such,didnt cross my mind at the time to get the console,luckily he relisted the other parts today and saw he pulled the console for sale, even went and ordered some leds for the clock when I install it.

 

[Sam Harris]

EXCTRACTED

View attachment 263286 View attachment 263287

Nice

 

[Mezzo]

If anyone wants some random Esky parts come pay a visit to TN. I'll buy you a beer.

https://www.facebook.com/marketplace/item/1108689766231566/